Ethernet Connections Diagram - Chauvet Professional NEXUS Aw 7x7 Guía De Referencia Rápida

Nexus™ Aw 7x7 QRG
Ethernet
Connections
Diagram
Kling-Net Mode
Art-Net™ Mode
Reset To
Factory
Defaults
NOTE: Do not use the router WAN port!
Computer or
Controller Running
TCP/IP based
protocol, such as
Kling-Net or Art-Net™
Kling-Net is a network protocol that uses TCP/IP to send DMX over
a network and into the Neutrik® etherCON® connection ports of
the Nexus™ Aw 7x7 panels. Kling-Net works seamlessly with
Kling-Net-supported ArKaos software for configuring and mapping display
devices. For more information, see the User Manual on the Chauvet
website at http://www.chauvetlighting.com/product-manuals-literature/.
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX
signals over a network and into the Neutrik® etherCON® connection
ports of the Nexus™ Aw 7x7 panels. Art-Net™ requires configuration
through the control panel. For more information, see the
this QRG or the User Manual on the Chauvet website.
An Art-Net™ Primer is available from www.chauvetprofessional.com. Art-
Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Nexus™ Aw 7x7 panels do not work with Art-Net™ controllers
sending in Broadcast mode. For information about the controller's
mode, see the controller's User Manual.
1. Disconnect the Nexus™ Aw 7x7 from power.
2. Press and hold <MENU/ESC> and <ENTER> simultaneously.
3. Reconnect the Nexus™ Aw 7x7 to power.
4. Release <MENU/ESC> and <ENTER>. The words Factory reset?
ENTER = Confirm show on the display.
5. Press <ENTER>.
Nexus™ Aw 7x7
Panels
Router
5
EN
Additional
Nexus™ 7x7
Panels
Menu Map in