Dutch originals DO-SV-BTB5-B Manual Del Usario página 9

C. If your TV is attached to the wall, you can mount the device centred on the wall
directly below the TV screen.
Installation must only be carried out by qualified personnel. Incorrect assembly can
result in severe personal injury and damage.
If you intend to install this device yourself, you must check for installations such
as electrical wiring and plumbing that may be buried inside the wall. The installer
is responsible for verifying whether the wall will safely support the total load of the
device and wall brackets.
Additional tools (not included) are required for installation.
Do not over-tighten screws.
Use an electronic stud finder to check the wall before drilling and mounting.
1) Remove the screws from the device.
2) Attach the wall brackets to the device using the screws removed from the device.
3) Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The
distance between the holes should be 767 mm.
4) Firmly fix 1 plug into each hole in the wall if necessary.
5) Insert 1 screw into each hole or plug. Leave a 5 mm gap between the wall and
the screw head. Lift the device with the attached wall brackets over the heads of the
screws and slot into place.
EN 07