Cameo CLROOTPAR4 Serie Manual De Usuario página 12

Manually set the DMX delay for DMX operating modes without DMX delay channel:
Starting from the main display, press MENU to go to the main menu. Using the
select the DMX Delay menu option and press enter to confirm your selection. Use
to select the desired submenu item, press ENTER to confirm, and set the corresponding value as
desired. Press ENTER to confirm all entries.
Assign the spotlight to one of 47 groups (maximum number of groups depends on the activated
DMX mode). Several spotlights can also be assigned to one group. The group number is also the
factor by which the set delay time is multiplied.
The delay time (delay time of the DMX signal) can be set manually on each spotlight separately
with different values (0.0 s to 2.0 s in 0.1 s steps).
Setup example:
Setting the DMX delay for DMX modes with DMX delay channel:
Starting from the main display, press MENU to go to the main menu. Using the
now select the DMX Delay menu option and press ENTER twice to confirm your selection.
Assign the spotlight to one of 47 groups (maximum number of groups depends on the activated
DMX mode). Several spotlights can also be assigned to one group. The group number is also the
factor by which the set delay time is multiplied. Confirm each entry with ENTER.
The delay time (delay time of the DMX signal) is set using a DMX controller in the separate DMX
delay channel of the corresponding DMX operating mode (0.0 s to 2.0 s in 0.1 s steps).
12
and keys, now
and again
and buttons,