Setup; Pairing Your Headset - Gioteck EX-01 BLUETOOTH G320 Manual Del Usuario

pairing your headset

Within the Settings' menu,
press X on Accessory Settings.
9
SECONDS
At the next screen, prepare the
Headset to be paired with the PS3 by
holding down the power button until
the LED flashes Blue & Green. When
the LEDs are flashing alternately
Blue & Green the headset is ready
to be paired.

04 | SETUP

Press X on the icon labeled: Press X on Yes.
Register Bluetooth® Device.
Press X on Start Scanning. Locate EX-01 from the list of available
Once Scan is complete, the PS3 will devices and press X to be prompted
recognize all Bluetooth devices for a Pass Key.
within range.
Enter 0000 (four zeros) as the You should then be taken to a new
Pass Key and press X on OK. screen stating: Register completed.
Press X on the icon labelled: Choose PS3 EX-01 as your input and
Audio Device Settings. output device from the lists.
Press X to confirm your choices.
Go to the Settings menu, press X
on Accessory Settings.
Scroll down and press X when you have
highlighted Connect [Bluetooth®].
Your Headset is now ready to use...
enjoy :)
SETUP | 05