charging your headset
The headset contains a rechargeable Li-ion polymer battery. Prior to using the headset for the first time, it is strongly
recommended to fully charge the battery.
Connect the USB cable to your PS3™ [1] and the mini usb [2] to the headset's charging socket [3]. The LED will illuminate
green during the charging process and will be off when fully charged. NOTE: Charging indication will be delayed for a few
minutes if the headset has not been used for a long time.
charging time
Normally the battery is fully recharged
within 3 hours. As soon as the battery is fully
charged, the LED will be off or weak Green.
Disconnect the USB cable from the PS3™
and the headset.
02
08 | CHARGING
game time
The fully charged battery offers up to 4
hours continuous use. It is advisable to
always recharge after lengthy gameplay
so the headset is fully charged for the
next round.
01
03
operating your headset
To power on your headet, press and hold the power button for 3 seconds until the LED flashes Blue. NOTE: If the LED
flashes Green only, the battery will need to be charged.
To power off your headet, press and hold the power button for 3 seconds until the LED flashes Green.
adjusting volume
muting
Tap the + button to increase the volume in
Press the power button briefly
increments until the headset reaches your
(less than 1 second) repeat the
desired volume level.
process to un-mute.
Tap the - button to decrease the volume in
increments until the headset reaches your
desired volume level.
Do not try to
pair the headset
to the console,
when the
headset is
attached to the
USB cable.
If it is attached
it will not pair. to
the PS3™.
VOLUME INCREASE
VOLUME DECREASE
OPERATION | 09