Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance or
cleaning on the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
PROBLEM
Appliance will not start.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Voltage
AR, B2C, B2
B3, BR
Input voltage
Input current
Pressure (max)
Weight
TROUBLESHOOTING
POSSIBLE CAUSE
Pressure setting may be below the
actual pressure
The fuse in the 12 Volt adaptor is
blown.
Pointer is in contact with the needle
indicator.
Cord is not plugged in
Cord or switch is damaged
ENGLISH • 13
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical products
from the household, at municipal waste sites or
by the retailer when you purchase a new product.
ASI300
220V
120V/127V
12V
0.5/0.9/8 A
1,103/160/11,03 kPa/psi/ba
1,93 Kg
POSSIBLE SOLUTION
Adjust the pressure setting pointer to
a higher setting. Turn it off and then
turn it on.
Replace the adaptor and cord.
Adjust the pressure setting pointer to
a higher setting. Turn it off and then
turn it on.
Plug the tool into a working outlet.
Have the cord or switch replaced at a
BLACK+DECKER Service Centre or
Authorized Service Centre.
Publicidad
Tabla de contenido
