Inficon TEK-Mate Manual De Instrucciones página 2

EU DECLARATION OF CONFORMITY
This declaration is issued under the sole responsibility of the manufacturer INFICON. The
object of the declaration is to certify that this equipment, designed and manufactured by
INFICON, is in conformity with the relevant Community harmonization legislation. It has been
constructed in accordance with good engineering practice in safety matters in force in the
Community and does not endanger the safety of persons, domestic animals or property when
properly installed and maintained and used in applications for which it was made.
Equipment Description . . . . . . . . . . . . . . . . . TEK-Mate Refrigerant Leak Detector
Model Number. . . . . . . . . . . . . . . . . . . . . . . . . 705-202-Gxx (Applicable to all group numbers)
Applicable Directives . . . . . . . . . . . . . . . . . . . 2014/30/EU General EMC
Applicable Standards:
Safety:
Emissions:
Immunity:
RoHS:
Other:
CE Implementation Date:
Manufacturer Representative
Brian King
INFICON
General Manager – Service Tools
Two Technology Place
East Syracuse, NY USA 13057
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S
PRODUCTS SHOULD BE DIRECTED, IN WRITING, TO THE AUTHORIZED
REPRESENTATIVE AT THE ABOVE ADDRESS.
EN 61010-1:2010 Safety requirements for electrical
equipment for measurement, control, and laboratory use.
General requirements.
EN 61326-1:2013 Edition 2.0 (Radiated, Conducted & Harmonic
Emissions) (EMC - Measurement, Control & Laboratory Equipment)
CISPR 11/EN 55011:2009 Emission standard for industrial,
scientific, (+A1:2010) and medical (ISM) radio RF equipment (Class A)
EN 61326-1:2013 Edition 2.0 (EMC - Measurement, Control &
Laboratory Equipment) Immunity per Table A.1 - Portable Test and
Measurement Equipment
EN 50581:2013 Technical documentation for the
assessment of electrical and electronic products with
respect to the restriction of hazardous substances
Performance of portable leak detectors and of room monitors for
halogenated refrigerants
2011/65/EU RoHS
April 20, 2016
EU Authorized Representative
INFICON GmbH
50968 Köln, Bonner Str. 498
2