Getting Started - Inficon TEK-Mate Manual De Instrucciones

Getting Started

1. Install the batteries. See
2. Install the sensor. See
NOTE: Installation of the batteries and sensor is required before use.
3. Long press the power button to turn TEK-Mate On or Off.
4. Wait for TEK-Mate to warm up. All three indicators will illuminate and TEK-Mate
will alarm during warm up. When the HIGH indicator starts flashing and
TEK-Mate beeps about one beep per second, warm-up is complete.
5. To toggle between HIGH and LOW sensitivity modes, press the Power button.
HIGH sensitivity is the default setting.
The INFICON TEK-Mate Refrigerant Leak Detector provides similar responses to
all CFCs, HCFCs, HFCs, HFOs, and refrigerant blends (e.g. R-410A, R407c) as
well as SF6.
How to Install the Alkaline
How to Install or Change the
4
Batteries.
Sensor.