Janome Quilting Kit Manual Del Usario página 2

Extra Wide Table
CAUTION:
Do not use the Extra Wide Table as an ironing table or for purposes other than explained in this
manual. Doing so may cause damage or injury.
Contents
q Table top ...1
w Legs ... 4
e Setscrews ... 4
r Rubber soles ... 4
t Table support (short) ... 1
Table support (long) ... 1
Assembling the Extra Wide Table
z Peel off the backing paper from the rubber
soles and attach to the bottom of the legs.
r Rubber sole
w Leg
x Attach the 4 legs to the table top with
the setscrews.
e Setscrew
c Select the table support (short or long) which is suitable for your sewing machine.
Attach the table support to the underside of the table top by inserting the hooks into the slots.
q Table top
t Table support (short or long)
v Remove the extension table.
Place the assembled table on the machine as shown so the table catches the pin on the backside of
the free arm.
y Pin
b Adjust the height of the table top by turning the adjusting screw.
u Adjusting screw
Open Toe Satin Stitch Foot (F2)
The open toe allows for a better view of sewing in
progress.
This foot can be used in place of the satin stitch
foot F.
5
4
2
7