Janome Quilting Kit Manual Del Usario página 5

Clear View Quilting Foot (OV) and Guide Set
An essential multi-function set for all quilters, the clear view foot comes with two removal guides: a
1/4 inch guide and a ditch quilting guide. The foot is marked with red guidelines at every 1/8 inch from
the needle in four directions. Designed for maximum ease of use, a unique shaped needle hole allows
needle adjustment for scant 1/4 inch and 7mm piecing, while the foot's see-through nature makes
fabric control a breeze.
• Clear view quilting foot with 1/8" seam red lines
• Patchwork piecing with the 1/4" seam guide
• Stitch in the ditch with the ditch quilting guide
Attaching the guide
1. Loosen the thumbscrew
q and insert the fork w of
the guide under the neck
of the thumbscrew.
2. Set the guide e alongside
(A) or (B) of the foot.
(A): 1/4" seam guide
(B): Ditch quilting guide
3. Tighten the thumbscrew.
CAUTION:
Make sure to press the Lockout key when
*
attaching and detaching the foot.
For models without the Lockout key, turn
*
the power switch off when attaching and
detaching the foot.
Please refer to your machine's instruction
*
manual for presser foot attachment and removal
information.
1/4" or 7mm Seam Piecing
Machine Settings
Stitch pattern: 1/4" or 7 mm piecing stitch
Guide: 1/4" seam guide
To Sew
Place the fabric matching
the side edge next to the
guide.
Lower the foot and sew
while guiding the fabric
edge along the guide. You
can also sew scan 1/4"
piecing by adjusting the
needle drop position.
w
q
(A)
w
e
(B)
e
Clear view quilting foot
Stitch in the Ditch
Machine Settings
Stitch pattern:
Guide:
To Sew
Place the quilt layers
aligning the seam line with
the guide q.
Lower the foot and sew
while guiding the seam line
along the guide.
1/8" Seam Piecing
Machine Settings
Stitch pattern:
Guide:
To Sew
Place the fabric matching
the right edge with the red
line to the right.
Lower the foot and sew while
guiding the fabric edge along
the red line.
The red lines are marked
*
at every 1/8" from the 1/4"
seam needle drop position.
Use these lines to measure
the seam allowance.
5
1/4" seam guide
Ditch quilting guide
Straight stitch
(center needle position)
Ditch quilting guide
1/4" piecing stitch
Without any guide
q
1/8"
1/8"