Publicidad
TIME AND DATE SETTING
- Ensure you are in TIDE/DATE/TIME mode.
- HOLD MODE/SET in for 2 seconds to enter setting.
- Press MODE/SET to advance through Year, Month, Day/date,
Hour, Minute, Seconds, Date format, 12 or 24 hr format, Hourly
chime, Key tone and Feet or Meters.
-Press START/STOP to increase. Press LAP/RESET to
decrease.
- Once complete, you must HOLD MODE/SET in for 2 seconds
again to exit setting mode and save any adjustments.
DAYLIGHT SAVINGS TIME (DST) SETTING
- Ensure you are in TIDE/DATE/TIME mode.
- HOLD START/STOP in for 5 seconds and your watch will automatically adjust to Daylight Savings
Time. DST icon will appear in the bottom left corner of your watch.
NOTE: At the start and end of DST season you MUST use the DST function as it corrects the current
time, and TIDE time to be DST correct.
DUAL TIME SETTING
- Ensure you are in TIDE/DATE/TIME mode.
- Press LAP/RESET to VIEW the second time zone.
- HOLD LAP/RESET in for 5 seconds to change to the second time zone, T2 icon will appear and stay
displayed in the bottom left hand corner of your watch. When in T1 no icon is visible in the screen.
TIDE SETTING
- Press MODE/SET to advance to TIDE MODE.
- HOLD MODE/SET in for 2 seconds to enter beach setting.
- To toggle between REGIONS use START/STOP & LAP/
RESET. When you find desired region press MODE/SET.
- Use START/STOP & LAP/RESET to toggle through to your
desired COUNTRY. Press MODE/SET to lock in your country.
- Use START/STOP & LAP/RESET to toggle to desired BEACH.
- HOLD MODE/SET in for 2 seconds to save selected beach.
- Once you set your beach you can use the START/STOP & LAP/RESET to toggle through all tide information
for today as well as past and future tides.
CUSTOMIZE A PRESET BEACH
In the case where one of the 200 preset beaches
isn't your local beach you can CUSTOMIZE the
tide data for any of the 200 preset beaches to
match your beach.
- Firstly, use the tide set procedure above to preset
the beach closest to your beach.
- Then find the average time offset between the
selected preset beach and your beach. Eg. Bells
plus 45 minutes equals my local beach.
- To activate CUSTOM setting, in TIDE mode press and HOLD LAP/RESET in for 2 seconds, OFFSET
appears and a ZERO digit will flash.
- Use START/STOP & LAP/RESET to increase or decrease the time offset till correct.
- Press MODE/SET to lock in your offset. The watch will then ask you to rename the preset beach to the
new beaches name.
22
(A)
LIGHT / RETURN
(B)
MODE / SET
Listed Beach
Tide Time Offset
(B)
offset is zero
B
( +/- 180 mins max.)
START / STOP
B
B
* Name changes to "CUSTOM" by default.
CUSTOM Name
B
go to the next character
(wrap around after the 8th character)
(D)
(C)
LAP / RESET
B
13
Publicidad
