Publicidad
- Use START/STOP & LAP/RESET to scroll through the alphabet and change the selected letter.
- Press MODE/SET to move to the next letter.
- Once complete, HOLD MODE/SET in for 2 seconds to save all information
NOTE: To leave the customized beach named as CUSTOM, put in the offset then HOLD MODE/SET
in for 2 seconds to save.
ALSO NOTE: Once you have customized a preset beach, eg. Bells, that location has been over written
and will no longer appear in the watches' beach list. To return to the original beach name and tide data,
you must be in TIDE MODE, HOLD MODE/SET in for 2 seconds, the digits will flash, use START/STOP
& LAP/RESET to change the offset back to zero, HOLD MODE/SET in for 2 seconds and the original
beach name, ie Bells, will reappear in the screen.
SPOT X BEACH INTRODUCTION
Just in case you can't find a preset location that can be customized to your local beach. Your watch
is equipped with a Spot X averaging tide function. Spot X follows the world accepted average tide
cycle of 6hrs 12mins and 25 seconds from High tide to Low tide. Spot X is present at the bottom
of EVERY beach list.
SPOT X SETTING
- Select Spot X from any beach list. (See tide setting)
- Find the next HIGH tide time for the beach you want to create and set the information using the procedure
below. (Tide information can be found in the local newspaper or tide guide)
- In TIDE mode HOLD LAP/RESET in for 2 seconds, the year will appear and flash, use START/STOP
& LAP/RESET to select the year.
- Press MODE/SET, the MONTH will flash in the top left hand corner. Use START/STOP & LAP/RESET
to enter month of the next high tide.
- Press MODE/SET the DATE will flash, use START/STOP & LAP/RESET to enter date of the
next high tide.
- Press MODE/SET, the HOUR will flash, use START/STOP & LAP/RESET to enter hour of the
next high tide.
- Press MODE/SET, the MINUTES will flash, use START/STOP & LAP/RESET to enter minutes of
the next high tide.
- Press MODE/SET, the S of Spot X with flash. You can rename Spot X to your local beach name by
following procedure below, or to leave the
name as Spot X, simply HOLD MODE/SET
in for 2 seconds to set and save all new
Spot X information.
- Or use START/STOP & LAP/RESET to
scroll through the alphabet and change the
selected letter. Press MODE/SET to move
to the next letter.
- Once complete, HOLD MODE/SET in for 2
seconds to save all.
NOTE: When Spot X is set no RANGE
information will be displayed, only the time
of the next tide and tide direction graph will
be displayed.
Spot X Beach
Year
(C)
Spot X Name
B
go to the next character
(wrap around after the 8th character)
Month
Day/Date
B
B
Minute
B
B
B
Hour
23
14
Publicidad
