Publicidad
SPOT X BEACH INTRODUCTION
Just in case you can't find a preset location that can be customized to
your local beach. Your watch is equipped with a Spot X averaging tide
function. Spot X follows the world accepted average tide cycle of 6hrs
12mins and 25 seconds from High tide to Low tide. Spot X is present at
the bottom of EVERY beach list.
SPOT X SETTING
- Select Spot X from any beach list. (See tide setting)
- Find the next HIGH tide time for the beach you want to create and set
the information using the procedure below. (Tide information can be
found in the local newspaper or tide guide)
- In TIDE mode HOLD LAP/RESET in for 2 seconds, the year will appear
and flash, use START/STOP & LAP/RESET to select the year.
- Press MODE/SET, the MONTH will flash in the top left hand corner.
- Use START/STOP & LAP/RESET to enter month of the next high tide.
- Press MODE/SET the DATE will flash, use START/STOP & LAP/RESET
to enter date of the next high tide.
- Press MODE/SET, the HOUR will flash, use START/STOP & LAP/RESET
to enter hour of the next high tide.
- Press MODE/SET, the MINUTES will flash, use START/STOP & LAP/RESET
to enter minutes of the next high tide.
- Press MODE/SET, the S of Spot X with flash. You can rename Spot X
to your local beach name by following procedure below, or to leave the
name as Spot X, simply HOLD MODE/SET in for 2 seconds to set and
save all new Spot X information.
- Or use START/STOP & LAP/RESET to scroll through the alphabet and
change the selected letter. Press MODE/SET to move to the next letter.
- Once complete, HOLD MODE/SET in for 2 seconds to save all.
NOTE: When Spot X is set no RANGE information will be displayed, only the
time of the next tide and tide direction graph will be displayed.
7
Publicidad
