Sonos ZonePlayer S5 Manual Del Usuario página 27

Sonos ZonePlayer S5
• To change the line-in level, select Settings→ZonePlayer Settings. Select the
ZonePlayer this source is connected to, and then touch Line-In Source Level.
Select a new level.
Using a Sonos Controller for Mac or PC:
• To play music from this line-in source, select the Line-In tab from the Music
Library, select the source, and click Play Now.
• To change the settings for this device, select the Line-In tab from the Music
Library, select the source, and click Setup. Select the Line-In tab to make
changes.
A default (typical) line-in level is automatically assigned when you select a source
name, but if the volume sounds too low, you can select a higher line level for this
device. (You may experience sound distortion at higher volume levels if you set the
level too high.)
For additional information on connecting audio devices, you can go to our Web site at
http://faq.sonos.com/cables.
17