Descargar Imprimir esta página

Matco Tools MTPGHVF13 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Instruction Manual for MTPGHFV13, and MTPGHVF15
This instruction manual contains valuable information for your work and safety.
Please read the manual carefully before operation and retain it for future reference.
CAUTION
• All operations including maintenance should be carried out ONLY by knowledgeable operators.
• Never aim the Matco Spray Gun towards humans or animals.
• Be aware of the conditions of your surroundings, and keep the spray equipment and the object
being sprayed firmly on the ground at all times.
• Do not exceed the maximum working pressure of the equipment
• Fluid and solvents can be highly flammable and corrosive. Handle with extreme care, and
keep away from fire and electrical hazards.
• Toxic vapors produced by spraying can cause serious damage to health. Always wear
protective equipment and use the Matco Spray Gun in well ventilated areas.
• Halogenated hydrocarbon solvents may cause chemical explosions. Use paint materials
which are chemically compatible with aluminum, copper and zinc parts.
• Always release air and fluid pressure before cleaning/disassembling/servicing. A ball-valve
installation is recommended for emergency stop and prevention of unintentional operation accidents.
• Make sure all parts, screws, and nuts are intact before putting the Matco Spray Gun into operation.
SPECIFICATIONS
IMPROVED
CONVENIENT
ENVIRONMENTAL FRIENDLY
SMOOTH OPERATION
10psi (0.7 bar)
Dual action trigger
will spray air only
or air and paint
Use Regulator (not included)
for best performance and
increased efficiency.
MODEL:
MTPGHVF13
MTPGHVF15
Forged body provides longer tool life. Anodized body for corrosion protection. Slick
finish for faster & easier cleaning.
1 Turn to lock/unlock the air cap. 3 Turns to lock/unlock the fluid tip.Wide threads for
easy cleaning. Compatible with most traditional and disposable cup systems.
Ensures 65% transfer efficiency, low overspray (bounce back), superior atomization
and Innovative High Efficiency (HV) advanced technology, providing benefits of
paint-saving and pollution-reduction.
Soft trigger pull to reduce fatigue. Precise lubricated adjustment knobs for better
control. Innovative CNC machining to avoid the need for gaskets behind the fluid tip.
Model #
MTPGHVF13
MTPGHVF15
Paint control
• Maximum working pressure is 115psi (8 bar).
adjustment
• Temperature range is between 5~40°C.
• Noise level is 78.8 dB(A) measured at 1m behind the tip of the gun
and 1.6m above the ground.
ALL ABOVE RECORDS ARE FOR REFERENCE ONLY.
Spray width
adjustment
Page 2
Product Type:
FORGED MATCO SPRAY GUN
WITH PLASTIC CUP
(Ømm)
(psi)
(l/min)
High Volume Low Pressure (HV)
1.3mm
1.5mm
29psi
255-285 l/min
(2.0 bar)
(9-10cfm)
Conforms to Machine Directive 89/392EC,
94/9/EC, and EN 13463-5:2003
(Certified by Sira Test & Certification SIRA 06XT299)
(mm)
(ml/min)
230-260mm
150-210ml/min
(9"-10
")
/
1
4
(0.039-0.0546
at spray
gpm)
distance of
100-170mm
(4"-7")
(kw)
1.5-3.7kw
(2-5H.P.)

Publicidad

loading

Este manual también es adecuado para:

Mtpghvf15