Matco Tools MABBR2 Manual Del Usuario
Matco Tools MABBR2 Manual Del Usuario

Matco Tools MABBR2 Manual Del Usuario

Aire cepillo de doble acción

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Proper Use of the Tool
Do not use the tool outside its design intent. Never modify
the tool for any other purpose than its intended function.
• Normal use of this product is likely to expose the
user to dust and/ or microscopic particles containing
chemicals known to the state of California to cause
cancer, birth defects or other reproductive harm.
Always wear appropriate safety equipment and
clothing when using this product. Study, understand
and follow all instructions provided with this product.
• Always wear ANSI approved goggles
when using this product
• Always use the correct accessories for
the job that you are performing.
• Always work in a clear, safe, well-lit,
organized and properly equipped area.
• NEVER begin repairs without ensuring that
vehicle is in secure position and will not
move during repair.
Product Information:
• Gravity-fed air brushes feature a unique 0.2mm
(or 0.3mm) needle and nozzle combination
that allows very fine and detail spraying
• All Air Brushes have pattern and
material (dual action) adjustments
• Comes with a 2cc or 8cc cup that is designed
for easy clean up and allows for
efficient paint flow
• Ideal for automotive, artistic, nail and beauty
applications, spraying on watercolors, heavier
acrylics and textile colors
• All Air Brushes come with a hose
MABBR2
0.2mm nozzle size
MODEL:
with 2cc gravity cup
MABCR2
0.2mm nozzle size
with 8cc gravity cup
MABCR3
0.3mm nozzle size
with 8cc gravity cup
The manufacturer warrants this product to the original user against defective
material or workmanship for a period of 1 year from the date of purchase.
The manufacturer reserves the right to determine whether the part or parts
failed because of defective material, workmanship or other causes. Failures
caused by accident, alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace product covered
under this warranty free of charge. Repairs or replacements of products
covered under this warranty are warranted for the remainder of the original
warranty period.
The manufacturer or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service
representatives voids this warranty. The rights under this warranty are limited
to the original user and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some
states do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
When unpacking, check the parts diagram and part number listing
on page 4 to make sure all parts are included. If any parts are
missing or damage, please call your distributor immediately.
DUAL ACTION
AIR BRUSH
Page 1
DUAL ACTION AIR BRUSH
1 YEAR LIMITED WARRANTY
WARNING
Unpacking
Important
Read these instructions carefully before
installing, operating, servicing or repairing this tool.
Keep these instructions in a safe accessible place.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Matco Tools MABBR2

  • Página 1 MABBR2 0.2mm nozzle size MODEL: with 2cc gravity cup MABCR2 0.2mm nozzle size DUAL ACTION AIR BRUSH with 8cc gravity cup MABCR3 0.3mm nozzle size with 8cc gravity cup Proper Use of the Tool Do not use the tool outside its design intent. Never modify the tool for any other purpose than its intended function.
  • Página 2 A good starting pressure of 35 psi (2.41 BAR) is recommended in MABCR2, MABCR3 and MABBR2. A good starting pressure of approximately 30-35 psi (2.07-2.45 BAR) may be suitable for order to take full advantage of Matco’s air brushes.
  • Página 3: Trouble Shooting Procedures

    MABBR2 0.2mm nozzle size MODEL: with 2cc gravity cup MABCR2 0.2mm nozzle size with 8cc gravity cup DUAL ACTION AIR BRUSH MABCR3 0.3mm nozzle size with 8cc gravity cup TROUBLE SHOOTING PROCEDURES Symptom Problem Solution Bubbles in color cup Loose needle packing screw Re-tighten #10 with a mini flat screwdriver;...
  • Página 4: Mesure De Sécurité

    MABBR2 buse de 0,2 mm et Type de produit : MODÈLE: réservoir de 2cl MABCR2 buse de 0,2 mm et réservoir de 8cl AÉROGRAPHE DOUBLE ACTION MABCR3 buse de 0,3 mm et réservoir de 8cl Utilisation Prévue Utiliser uniquement cet outil pour l’usage pour lequel il a été conçu.
  • Página 5 être idéal pour réaliser le plein potentiel des Aérographes plus élevées. Une bonne pression de départ de 35 psi (2,41 BAR) est Matco : MABCR2, MABCR3 et MABBR2. Une bonne pression de recommandée pour se servir au mieux des aérographes de Matco.
  • Página 6: Procedures De Depannage

    MABBR2 buse de 0,2 mm et Type de produit : MODÈLE: réservoir de 2cl MABCR2 buse de 0,2 mm et réservoir de 8cl AÉROGRAPHE DOUBLE ACTION MABCR3 buse de 0,3 mm et réservoir de 8cl PROCEDURES DE DEPANNAGE Symptôme Problème Solution Bulles dans le réservoir de...
  • Página 7: Advertencias De Seguridad

    MABBR2 0.2mm Tamaño de Tipo de producto: MODELO: Boquilla con 2cc Cup MABCR2 0.2mm Tamaño de Boquilla con 8cc Cup AIRE CEPILLO DE DOBLE ACCIÓN MABCR3 0.3mm Tamaño de Boquilla con 8cc Cup Uso Previsto de la Herramienta Use esta herramienta exclusivamente para el fin que fue diseñada.
  • Página 8: Mantenimiento

    Matco del Aire pinturas se roció con presiones más altas. Una buena iniciando de Cepillos: MABCR2, MABCR3 y MABBR2. Una buena comienzo presión de 35 psi (2,41 bar), se recomienda, a fin de sacar el máximo presión aproximadamente de 30-35 psi (2,07-2,45 BAR) pueden ser...
  • Página 9: Los Procedimientos De Resolucion De Peoblemas

    MABBR2 Tipo de producto: 0.2mm Tamaño de MODELO: Boquilla con 2cc Cup MABCR2 0.2mm Tamaño de Boquilla con 8cc Cup AIRE CEPILLO DE DOBLE ACCIÓN MABCR3 0.3mm Tamaño de Boquilla con 8cc Cup LOS PROCEDIMIENTOS DE RESOLUCION DE PEOBLEMAS Síntoma Problema Solución...
  • Página 10: Parts Breakdown

    MABCR-15 Needle Lock Screw MABCR2NA 0.2mm Nozzle Assembly (includes MABCR-1, MABCR-2, MABCR-3, and MABCR-8) Can be used for MABBR2, MABCR2, or MABCR3 * Available only in Nozzle Assembly MABCR3NA 0.3mm Nozzle Assembly (includes MABCR2NA or MABCR3NA MABCR-1, MABCR-2, MABCR-3A, and MABCR-8)

Este manual también es adecuado para:

Mabcr2Mabcr3

Tabla de contenido