TIME ADJUSTMENT
Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries. Set the
date first and then the time.
* When you install the batteries for the first time, the monitor will display the
clock setting screen. You do not need to perform step 1. Proceed to step 2.
If you set the clock and change its setting, start from step 1.
1
Press and hold the
seconds.
The "year" indicator blinks.
2
Press the
Press
Adjust switch to increase the number by one.
(The year can be adjusted in the range of 2011-2040.)
Press
Date/Time Set switch to confirm the setting.
The "year" is set and the "month" indicator blinks.
* You can fast-forward the numbers in display by
pressing and holding
3
Press the
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confirm the setting.
The "month" is set and the "day" indicator blinks.
4
Press the
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confirm the setting.
The "day" is set and the "hour" indicator blinks.
Date/Time Set switch for approximately two
Adjust switch to adjust the year.
Adjust switch.
Adjust switch to adjust the "month".
Adjust switch to adjust the "day".
- Eng 13 -