Metra Electronics INST-4544 Instrucciones De Uso Y De Instalacion página 9

Cadillac Deville 1985-1995
Fleetwood 1985-1992
1. Remove (2) screws from the top of the radio
trim bezel.
2. Pull out on the top edge of the bezel and lift up
to remove. (Figure A)
3. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S-10 application
shown as example)
(Figure A) (Figure B)
Dash Disassembly 99-4544
Cadillac Eldorado/Seville
1984-1991
1. Remove (2) Phillips screws above the A/C vents.
(Figure A)
2. Pull out on the top edge of the dash trim bezel
unhook the bottom edge and remove.
3. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S-10 application
shown as example)
(Figure A) (Figure B)
9
Cadillac Escalade, Escalade
EXT/Chevrolet Avalanche,
C-K Pickup, Silverado,
Suburban, Tahoe/GMC C-K
Pickup, Sierra, Suburban,
Yukon 1995-2002
1. Remove the steering column filler panel and the
ashtray. (Figure A)
2. Unclip the dash trim bezel and remove.
3. Using a small flat-blade screwdriver, press
down on the outer clips of the factory radio
(or pocket).
4. Disconnect the wiring and remove the radio.
Locate Bracket Set #8. (Figure B)
Continue to kit assembly
(Figure A) (Figure B)