Adjusting Low Flame Setting On Cooktop Burners; Additional Information - Monogram 30 Instrucciones De Instalación

Installation Instructions for Gas Conversion
4
ADJUSTING LOW FLAME SETTING
ON COOKTOP BURNERS
burners in operation on a medium setting. This
other burners are turned on.
a stable flame. Repeat for all
Repeat door openings until flame is stable.
Multi-Ring Burner (on some
models)
to adjust the outer ring. Turn
the outer ring adjustment
so that the outer ring flames
of the burner cap.
to adjust the center ring. Turn
as far as
stable flame.
for a larger flame. Repeat door
openings until flame is stable.
31-11130
Round Burners
Inside shaft
Multi-Ring Burner
Flames
Multi-Ring Burner
for outer ring
for center ring
SPECIAL NOTE:
To convert the cooktop back to natural gas,
reverse the instructions given in making propane
(LP) adjustments.
NOTICE:
sticker to the cooktop near the regulator to alert others

ADDITIONAL INFORMATION

BURNER OUTPUT RATINGS: BTU/HR
NG (Natural) Gas 5" W.C.P.
BTU RATE
BURNER
C
C2
RF
198
N
III
ORIFICE SIZE
(mm) MARKING