Turning The Vacuum On; Important; Cleaning Tools - Simplicity Spruce Manual Del Usuario

Turning the Vacuum On

Hold the vacuum handle firmly in your hand and
turn the power button to the "Low Speed" position
indicated by the "I" (Fig. 1). Turn the power button
to the "High Speed" position indicated by the "II"
(Fig. 2) when more power is required, for example
when vacuuming carpeted stairs.
Hose Cleaning
• To clean with the hose attachment, remove the
hose from the inlet. This disables the brushroll
allowing for better cleaning performance with
the hose.
• Reattach the hose to the inlet to activate the
brushroll for carpet cleaning. Push the hose onto
the inlet until it clicks. Doing so will ensure the hose
is properly attached and the brushroll is activated.

Important:

Do not push the hose too far onto the inlet. If
the hose is pushed too far onto the inlet, the
brushroll will not activate.

Cleaning Tools

Your vacuum is equipped with a dusting brush and
crevice tool.
D usting Brush
Ideal for table tops, shelves and blinds. A dusting
brush is attached to the end of the hose. To
extend the brush, twist the brush to unlock it. Push
the brush away from the hose and twist it in the
opposite direction to lock it into place. Retract the
brush when not in use.
Crevice Tool
Ideal for tight places like between seat
cushions or corners. Attach the crevice tool to the
end of the dusting brush.
5
Crevice Tool