Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

M
7
V
I
Q
M
7
V
I
Q
M
7
V
I
Q
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we
will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i

Publicidad

Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Biostar M7VIQ

  • Página 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Página 2: Tabla De Contenido

    ENGLISH..................... 1 M7VIQ Features ......................... 1 Package contents ......................1 Layout of M7VIQ ........................ 2 CPU Installation ......................... 3 DDR DIMM Modules: DDR1-2 ................... 4 Jumpers, Headers, Connectors & Slots ................5 ESPAÑOL ....................12 Características del M7VIQ ....................12 Contenido del Paquete....................
  • Página 3: English

    English M7VIQ Features Use Via KM266/ VT8235 Chipset, W83697HF, LAN Chip (optional). Contains on board I/O facilities, which include one serial port, one VGA port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a LAN port (optional) and a game port.
  • Página 4: Layout Of M7Viq

    Layout of M7VIQ JKBMS1 JATXPWER1 JKBV1 JUSBV1 JUSBLAN1 JDJ1 FDD1 JCOM1 JPRNT1 JCFAN1 VT8375 JVGA1 (KM 266) JSPKR1 JUSBV3 SP-OUT JLIN1 LINE-IN JMIC1 LAN CHIP MIC-IN IDE1 IDE2 JAUD GAME JDIMMVOLT BAT1 PCI1 JUSB2 JUSB3 Codec JUSBV2 VT 8235 PCI2...
  • Página 5: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Página 6: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered DDR 200/266 MHz Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket DDR Module Total Memory Location Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB Max is DDR 2 64MB/128MB/256MB/512MB/1GB * The list shown above for DRAM configuration is only for reference.
  • Página 7: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100/ 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary).
  • Página 8 Power Connectors: JATXPWR1 JATXPWR1 JATXPWR1 (ATX Main Power Conn.) (ATX Main Power Conn.) DIMM Power Selection Connector: JDIMMVOLT Pin 1-2 on ==> 2.5V Pin 3-4 on ==> 2.6V JDIMMVOLT Pin 5-6 on ==> 2.7V Pin 7-8 on ==> 2.8V (Default ==> 2.5V) It strongly recommended to set DDR DIMM voltage in default setting 2.5V, and it for over voltage function.
  • Página 9 Front USB Header: JUSB2/ JUSB3 Pin Assignment Pin Assignment Data (-) Data (-) Data (+) Data (+) JUSB1/2 Ground Ground 5V/ 5VSB Selection for USB: JUSBV1/2/3 JUSBV1/2/3 Assignment Pin 1-2 on 5V_SB Pin 2-3 on CPU Frequency Selection: JCLK1 On ==> 100MHz Off ==>...
  • Página 10 5V/ 5VSB Selection for Keyboard: JKBV1 JKBV1 Assignment Pin 1-2 on 5V_SB Pin 2-3 on CNR Codec Primary/ Secondary Selection: JCODECSEL Assignment J_CODECSEL Pin 1-2 On-board Primary Codec (Default). Pin 2-3 CNR Primary Codec.
  • Página 11 Front Panel Connector: JPANEL1 PWR_LED ON/OFF HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button ==> Infrared Conn. ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button Audio DJ: JDJ1 Pin1 ==> SMBDT Pin2 ==> SMBCK Pin3 ==>...
  • Página 12 Audio Subsystem: JF_AUDIO/JCDIN1 JF_AUDIO1 (Front Audio Header) JCDIN1 (CD-ROM Audio-In Header) JAUDIO1 Assignment Assignment Mic In Ground Audio Power Mic Power RT Line Out RT Line Out Reserved LFT Line Out LFT Line Out Pin 5 and 9 are routed to Front Panel Audio Out. Pin 6 and 10 are routed from Front Panel Audio Out.
  • Página 13: Back Panel Connectors

    Back Panel Connectors JGAME1_USB1 RJ45USB1 JKBMS1 Game Port/ USB Ports (optional) JPRNT1 LAN(Optional) PS/2 Mouse Parallel PS/2 Speaker Line In Mic COM1 COM1 VGA1 Keyboard JCOM1 JVGA1...
  • Página 14: Español

    Español Características del M7VIQ Usa Chipset Via KM266/ VT8235, W83697HF, LAN Chip (opcional). Contiene facilidades I/O integrados en la placa madre en el que incluye un puerto en serie, un puerto paralelo, un puerto de ratón PS/2, un puerto de teclado PS/2, puerto de audio, puertos USB, un puerto LAN (opcional), un puerto de juego, y un puerto para el monitor.
  • Página 15: Disposición Del M7Viq

    Cable USB X 2 (Opcional) Panel Trasero I/O para Caja ATX X 1 (Opcional) Disposición del M7VIQ JKBMS1 J A TXPW ER1 J K BV 1 J U SBV 1 JUSBLAN1 FDD1 JCOM1 JPRNT1 J CFAN1 JVGA1 KM 266 JSPKR1...
  • Página 16: Instalación Del Cpu

    Instalación del CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Página 17: Módulos Ddr Dimm: Ddr1-2

    Módulos DDR DIMM: DDR1-2 DRAM Tiempor de Acceso: 2.5V Unbuffered DDR 200/266 MHz Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 pin) Localización Total del del Módulo Tamaño de Módulo DDR DIMM Memoria (MB) DDR 1 64MB/128MB/256MB/512MB/1GB Máximo de DDR 2...
  • Página 18: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Página 19 Conectores de Corriente: JATXPWR1 JATXPWR1 JATXPWR1 (ATX Main Power Conn.) (ATX Conector de Corriente Principal.) Conector de Selección de la Corriente DIMM: JDIMMVOLT Pin 1-2 encendido ==> 2.6V Pin 1-2 encendido ==> 2.5V Pin 3-4 encendido ==> 2.7V Pin 3-4 encendido ==> 2.6V JDIMMVOLT JDIMMVOLT Pin 5-6 encendido ==>...
  • Página 20 Puente de Borrar JCMOS1 Asignacion CMOS: JCMOS1 Operacion Normal Contacto (default) 1-2 on Borrar Datos Contacto CMOS 2-3 on Cabezal Frontal USB: JUSB2/ JUSB3 JUSB2/ 3 Contactos Asignacion Contactos Asignacion Data (-) Data (-) Data (+) Data (+) Tierra Ground 5V/ 5VSB Selección para USB: JUSBV1/2/3 JUSBV1/ 2/ 3 Asignacion...
  • Página 21 Selección de Frecuencia del CPU: JCLK1 On ==> 100MHz Off ==> 133MHz JCLK1 5V/ 5VSB Selección para Teclado: JKBV1 JKBV1 Asignacion Contactos 1-2 on 5V_SB Contactos 2-3 on CNR Codec de Selección Primario/ Secundario: JCODECSEL Assignment J_CODECSEL Contacto Codec Primario integrado en la placa madre.
  • Página 22 Conector del Panel Frontal: JPANEL1 PWR_LED ON/OFF HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Audio DJ: JDJ1 Contacto1 ==>...
  • Página 23 Subsistema de Audio: JF_AUDIO/JCDIN1 JF_AUDIO1 (Cabezal Frontal de Audio) JCDIN1 (Cabezal de Entrada de Audio CD-ROM) JAUDIO1 Contactos Asignacion Contactos Asignacion Entrada del MIC Tierra Corriente del MIC Corriente de Audio RT Salida de Linea RT Salida de Linea Reservado LFT Salida de Linea LFT Salida de Linea Contactos 5 y 9 son encaminados a la Salida de Audio del Panel...
  • Página 24: Conectores Del Panel Trasero

    Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting Configuracion La senal de salida de linea del Audio Contacto 5 & 6 encamina al conector de la salida de linea Contacto 9 & 10 del Audio ubicado en el panel trasero. La senal de salida de linea del Audio y la senal del entrada del mic estan disponibles No jumpers...
  • Página 25: Trouble Shooting

    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on. Indicator light on keyboard does not turn on * Contact technical support PROBABLE SOLUTION...
  • Página 26: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. Indicador de * Reemplace el cable. luz del teclado apagado.
  • Página 27 12/04/2002...

Tabla de contenido