Biostar M7NCG Manual Del Usuario
Ocultar thumbs Ver también para M7NCG:

Publicidad

Enlaces rápidos

All manuals and user guides at all-guides.com
M
7
N
C
G
M
7
N
C
G
M
7
N
C
G
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here of without obligation to notify any party
beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we will not
be responsible for any mistakes found in this user's manual. All the brand and
product names are trademarks of their respective companies.
i

Publicidad

Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Biostar M7NCG

  • Página 1 All manuals and user guides at all-guides.com FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Página 2: Tabla De Contenido

    CPU Installation ......................... 4 DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1............5 Jumpers, Headers, Connectors & Slots ................6 ESPAÑOL ....................12 Características del M7NCG (para V1.3) ................. 12 Contenido del Paquete....................13 Disposición del M7NCG ....................14 Instalación de la CPU ...................... 15 Instalación de la CPU ......................
  • Página 3: English

    All manuals and user guides at all-guides.com English M7NCG Features(for V 1.3) ® Supports the AMD Socket462 processor up to XP 3000+. Running at 200/266/333MHz Front Side Bus. Chipset North Bridge: IGP Chipset. South Bridge: MCP-T/ MCP Chipset. High Speed 800Mb/s Hyper-Transport interface to the MCP-T.
  • Página 4: Package Contents

    All manuals and user guides at all-guides.com On Board Peripherals Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers. Supports 2 serial ports. Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode) Supports PS/2 mouse and PS/2 keyboard. Supports 2 back USB2.0 ports and 4 front USB2.0 ports. (Optional) BIOS AWARD legal Bios.
  • Página 5: Layout Of M7Ncg

    All manuals and user guides at all-guides.com Layout of M7NCG JKBMS1 JKBV1 JUSBLAN1 JCFAN1 FDD1 JCOM1 JATXPWER1 JUSBV2 JPRNT1 JCLK3 JVGA1 JSPKR1 Winbond SP-OUT JLIN1 LINE-IN JGAME1 JMIC1 MIC-IN JNFAN1 IDE2 IDE1 Chip PCI1 BAT1 MCP-T Codec PCI2 J_SPDIF1 JCMOS...
  • Página 6: Cpu Installation

    All manuals and user guides at all-guides.com CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Página 7: Ddr Dimm Modules: Dimmb1/Dimmb2/ Dimma1

    All manuals and user guides at all-guides.com DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1 For Dual-channel DDR (128-bit) high performance, at least 2 or more DIMM modules must be installed. (It has to be the combination of DIMMA and DIMMB.) With only one DIMM installed, the memory performs only at 64-bit.
  • Página 8: Jumpers, Headers, Connectors & Slots

    All manuals and user guides at all-guides.com Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100/ 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary).
  • Página 9 All manuals and user guides at all-guides.com Wake On LAN Header: JWOL1 Wake up Ground 5V_SB JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Assignment Pin Assignment Data (-) Data (-) Data (+) Data (+) JUSB1/2 Ground Ground 5V/ 5V_SB Selection for KB: JKBV1 JKBV1 Asignacion Contactos...
  • Página 10 All manuals and user guides at all-guides.com 5V/ 5V_SB Selection for USB: JUSBV1/JUSBV2/JUSBV4 JUSBV1/ 2/ 4 Assignment Pin 1-2 on 5V_SB Pin 2-3 on Front Panel Connector: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==>...
  • Página 11 All manuals and user guides at all-guides.com JF_AUDIO1 Assignment Assignment Mic In Ground Mic Power Audio Power RT Line Out RT Line Out Reserved LFT Line Out LFT Line Out ⌦ JF_AUDIO1 only support 2CH. Front Panel Audio Connector/ Jumper Block Jumper Setting Configuration Pin 5 and 6...
  • Página 12 All manuals and user guides at all-guides.com Remove AC JCMOS1 wait 15 JCMOS power line Pin2-3 close seconds Pin1-2 close AC power Reset the passwort as your will or clear CMOS data Frequency Selection: JCLK3 Open==> 133/166MHz Close==> 100MHz JCLK3 Case Open Connector: JC1 Case Open Signal...
  • Página 13: Back Panel Connectors

    All manuals and user guides at all-guides.com Digital Audio Connector: J_SPDIF1 SPDIF_OUT VCC5 J_SPDIF1 Back Panel Connectors JKBMS1 JUSBLAN1 JPRNT1 JGAME1 LAN(Optional) PS/2 Mouse Parallel Game Port PS/2 Line In Mic Speaker COM1 VGA1 Keyboard JCOM1 JVGA1 The LED indicator for Lan port status: Status Normal Download...
  • Página 14: Español

    All manuals and user guides at all-guides.com Español Características del M7NCG (para V1.3) ® Soporta procesador AMD Zócalo 462 de hasta XP 3000+. Corriendo a 200/266/333MHz FSB. Chipset North Bridge: IGP Chipset. South Bridge: MCP-T/ MCP Chipset. High Speed 800Mb/s Hyper-Transport interface para el MCP-T.
  • Página 15: Contenido Del Paquete

    All manuals and user guides at all-guides.com Soporta 2 puertos serie. Soporta 1 multi-modo del puerto paralelo (modos SPP/EPP/ECP) Soporta ratón PS/2 y teclado PS/2. Soporta 2 puertos USB2.0 traseros y 4 puertos USB2.0 delanteros. (Opcional) BIOS AWARD legal Bios. Soporta APM1.2.
  • Página 16: Disposición Del M7Ncg

    All manuals and user guides at all-guides.com Disposición del M7NCG JKBMS1 JKBV1 JUSBLAN1 JCFAN1 FDD1 JCOM1 JATXPWER1 JUSBV2 JPRNT1 JCLK3 JVGA1 JSPKR1 Winbond Salida del Altavoz JLIN1 Entrada de JGAME1 Linea JMIC1 Entrada del MIC JNFAN1 IDE2 IDE1 Chip PCI1...
  • Página 17: Instalación De La Cpu

    All manuals and user guides at all-guides.com Instalación de la CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU.
  • Página 18: Módulos Ddr Dimm: Dimmb1/Dimmb2/ Dimma1

    All manuals and user guides at all-guides.com Módulos DDR DIMM: DIMMB1/DIMMB2/ DIMMA1 Para un alto funcionamiento, Dual-channel DDR (128-bit), por lo menos 2 o más módulos DIMM debe ser instalado. (Tiene que ser la combinación del DIMMA y DIMMB.) Con solamente un DIMM instalado, la memoria funciona solamente a 64-bit.
  • Página 19: Conectores, Cabezales, Puentes Y Ranuras

    All manuals and user guides at all-guides.com Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalida Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario).
  • Página 20: 5V_Sb Selección Para Kb: Jkbv1

    All manuals and user guides at all-guides.com Cabezal Wake On LAN: JWOL1 Wake up Tierra 5V_SB JWOL1 Cabezal Frontal USB: JUSB1/ JUSB2 JUSB1/2 Contactos Asignacion Contactos Asignacion Data (-) Data (-) Data (+) Data (+) Tierra Tierra 5V/ 5V_SB Selección para KB: JKBV1 JKBV1 Asignacion Contactos...
  • Página 21 All manuals and user guides at all-guides.com 5V/ 5V_SB Selección para USB: JUSBV1/JUSBV2/JUSBV4 JUSBV1/ 2/ 4 Asignacion Contactos 1-2 on 5V_SB Contactos 2-3 on Conector del Panel Frontal: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==>...
  • Página 22 All manuals and user guides at all-guides.com JF_AUDIO1 Contactos Asignacion Contactos Asignacion Tierra Entrada del MIC Corriente del MIC Corriente de Audio RT Salida de Linea RT Salida de Linea Reservado LFT Salida de Linea LFT Salida de Linea ⌦JF_AUDIO1 only support 2CH. Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting Configuracion...
  • Página 23: Selección De Frecuencia: Jclk3

    All manuals and user guides at all-guides.com Quite el cable JCMOS1 JCMOS Espere 15 de corriente Contactos Contactos segundos 2-3 cerrado del AC 1-2 cerrado Encienda Reconfigure la contrasena deseada o borre datos CMOS Selección de Frecuencia: JCLK3 Abierto ==> 133/166MHz Cerrado ==>...
  • Página 24 All manuals and user guides at all-guides.com Conector Digital de Audio: J_SPDIF1 SPDIF_OUT VCC5 J_SPDIF1 Conectores del Panel Trasero JKBMS1 JUSBLAN1 JPRNT1 JGAME1 Raton LAN(Opcional) PS/2 Paralelo Puerto de Juego Teclado Salida del Entrada Entrada de COM1 VGA1 Altavoz de Linea PS/2 JCOM1 JVGA1...
  • Página 25: Deutsch

    All manuals and user guides at all-guides.com Deutsch M7NCG Features(for V 1.3) Unterstützung für AMD Prozessor(Sockel462 ) bis zu XP 3000+. FSB mit 200/266MHz.. Chipsatz Northbridge: IGP. Southbridge: MCP-T/ MC . 800Mb/s Hohe Geschwindigkeit : Hyper-Transport -Interface zu den MCP-T Chipsatz.
  • Página 26: Verpackungsinhalt

    All manuals and user guides at all-guides.com On Board Peripherals 1 Floppy-Port mit Unterstützung für 2 Diskettenlaufwerke.(360KB, 720KB, 1.2MB, 1.44MB und 2.88MB) 2 serielle Schnittstellen. 1 parallele Schnittstelle mit Unterstützung für SPP/EPP/ECP-Modus. Unterstützung für PS/2-Maus und PS/2 -Tastatur. Unterstützung für sechs USB2.0-Ports. (hintenX4, vornX2) BIOS Unterstützung für AWARD legal Bios.
  • Página 27: Layout Des M7Ncg

    All manuals and user guides at all-guides.com Layout des M7NCG JKBMS1 JKBV1 JUSBLAN1 JCFAN1 FDD1 JCOM1 JATXPWER1 JUSBV2 JPRNT1 JCLK3 JVGA1 JSPKR1 Winbond SP-OUT JLIN1 LINE-IN JGAME1 JMIC1 MIC-IN JNFAN1 IDE2 IDE1 Chip PCI1 BAT1 MCP-T Codec PCI2 J_SPDIF1 JCMOS...
  • Página 28: Installation Der Cpu

    All manuals and user guides at all-guides.com Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU.
  • Página 29: Ddr-Dimm-Modules: Dimmb1/Dimmb2/ Dimma1

    All manuals and user guides at all-guides.com DDR-DIMM-Modules: DIMMB1/DIMMB2/ DIMMA1 Für Dual-Kanal DDR(128bit) High-Performance mußt mindenstens zwei oder mehr DIMM-Modules installieren. (Der Speicher mußt in der Kombination von DIMMA und DIMMB installiert werden.) DRAM Zugriffszeit: 2.5V unbuffered DDR 200/266/333/400 MHz Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (184 pin) DIMM-Sockel DDR-Module...
  • Página 30: Jumper, Header, Anschlüsse & Slots

    All manuals and user guides at all-guides.com Jumper, Header, Anschlüsse & Slots Festplattenanschlüsse: IDE1 und IDE2 Das Mainboard hat einen 32-Bit Enhanced PCI IDE-Controller, der die Modi PIO0~4, Bus Master sowie die Ultra DMA/33/66/100/133- Funktion zur Verfügung stellt. Dieser ist mit zweii HDD-Anschlüssen versehen IDE1 (primär) und IDE2 (sekundär).
  • Página 31 All manuals and user guides at all-guides.com Wake On LAN Header: JWOL1 Erwachen Grund 5V_SB JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Beschreibung Pin Beschreibung Data (-) Data (-) Data (+) Data (+) JUSB1/2 Front 1394 Header: J1394A/ J1394B Pin Beschreibung Pin J1394A/ B +12V +12V...
  • Página 32 All manuals and user guides at all-guides.com Anschlüsse auf der Vorderseite: JPANEL1 PWR_LED EIN/AUS (+) (-) HLED ==> Lautsprecheranschl. HLED ==> Festplattenanzeige ==> Reset-Taste ==> Infrarotanschl. ==> Sleep-Taste PWR_LED ==> Stromanzeige EIN/ AUS ==> Ein-/ Ausschalttaste Audio Subsystem: JF_AUDIO1/ JCDIN1 JF_AUDIO1 JAUDIO1 JCDIN1...
  • Página 33 All manuals and user guides at all-guides.com Audio-Anschl sse f r die Vorderseite/ Jumper-Block Jumper-Einstellen Konfiguration Audio-Ausgang-Singals werden zu der Audio- Pin 5 und 6 Ausgang-Anschluss an der R ckwand geleitet. Pin 9 und 10 Audio-Ausgang- und Mic-In-Singals sind verf gbar Kein Jumper f r Audio-Anschl sse an der Vorderseite.
  • Página 34 All manuals and user guides at all-guides.com Frequenz Auswahl: JCLK3 geoffnet==> 133/166MHz geschlossen==> 100MHz JCLK3 Case Open Connector: JC1 Case Open Gehause-Offnen Signal Signal Ground Grund Auswahl für Primär/Sekundär CNR-Codec: J_CODECSEL Beschreibung J_CODECSEL Pin 1-2 Onboard-Primar- Codec Pin 2-3 CNR-Primar-Codec Digital-Audio-Anschluss: J_SPDIF1 SPDIF_OUT VCC5...
  • Página 35: Anschlüsse Auf Der Rückseite

    All manuals and user guides at all-guides.com Anschlüsse auf der Rückseite RJ45USB1 JKBMS1 JPRNT1 LAN(optional) PS/2- JGAME1_USB1 Maus Parallel Game-Port Mic- In Line-In PS/2- COM1 COM1 VGA1 Tastatur JCOM1 JVGA1 Die Signallampe für Lan-Port Status: Status Normal Download Geschwindigkeit Lampe von rechts: grün Lampe: 10Mbps Lampe von links: kein...
  • Página 36: Français

    All manuals and user guides at all-guides.com Français M7NCG Particularités (pour V1.3) : CPU : Soutient le processeur d'AMD ® Socket462 jusqu'à XP 3000 +. Dirigeant à Autobus de Côté 200/266/333MHz de Devant. Chipset : Pont du Nord : IGP Chipset.
  • Página 37 All manuals and user guides at all-guides.com À bord Périphériques : Soutient 360Ko, 720Ko, 1.2MB, 1.44MB et 2.88MB des conducteurs de disquette. Soutient 2 ports périodiques. Soutient 1 multi-mode le port parallèle. (SPP/EPP/ECP mode) Soutient souris de PS/2 et clavier de PS/2. Soutient 2 ports d’USB2.0 en arrière et 4 ports d’USB2.0 en avant.
  • Página 38: Dessin D'M7Ncg

    All manuals and user guides at all-guides.com Dessin d’M7NCG JKBMS1 JKBV1 JUSBLAN1 JCFAN1 FDD1 JCOM1 JATXPWER1 JUSBV2 JPRNT1 JCLK3 JVGA1 JSPKR1 Winbond SP-OUT JLIN1 LINE-IN JGAME1 JMIC1 MIC-IN JNFAN1 IDE2 IDE1 Chip PCI1 BAT1 MCP-T Codec PCI2 J_SPDIF1 JCMOS J_CODECSEL...
  • Página 39: 9Th Touch Tm Is Nice Touch

    All manuals and user guides at all-guides.com 9th Touch is NICE TOUCH [9th Touch] means users could enjoy the speed, safety & convenience when respective booting requirement. The easiest way is just to touch 「F9」 function key during booting procedure to choose any device you like to boot for the system. Forget about entering CMOS, rebooting activities.
  • Página 40: Bios Star -[ Flasher™ ]

    CMOS and do it. Flasher Step by Step 1. Download the latest BIOS file from the BIOSTAR website to a floppy disk. 2. Insert the disk that contains the newest BIOS file into the floppy drive. 3. Power ON the computer.
  • Página 41 All manuals and user guides at all-guides.com Figure 1 6. Press " Arrow Up/Down " key to choose BIOS file, refer to Figure 2 Figure 2 Press [Enter] to load the BIOS from the floppy disk, refer to Figure 3.
  • Página 42 All manuals and user guides at all-guides.com Figure 3 8. At the prompt "Are you sure to flash (Y/N) ", press [Y] to flash BIOS or [N] to cancel the flashing process, refer to Figure 4. Figure 4 After pressing [Y], the flash starts to process, refer to Figure 5.
  • Página 43 All manuals and user guides at all-guides.com 10. A message " Flash done, Restart System (Y/N) " will appear if the system was successfully updated the BIOS, refer to Figure 6. Figure 6 11. Press [Enter], then the flashing is done!
  • Página 44: Watchdog Technology

    Watchdog Technology It is important to know that when overclocking, the system can be at a vulnerable state. Therefore, the BIOSTAR Watchdog Technology was designed to protect your PC under dangerous over-clock situations. Any over-clocking that reaches the threshold settings, the Watchdog Technology will disable your system from rebooting in the BIOS setting.
  • Página 45: Trouble Shooting

    All manuals and user guides at all-guides.com Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on.
  • Página 46: Solución De Problemas

    All manuals and user guides at all-guides.com Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de corriente * Asegúrese que el cable de transmisión esté no ilumina, ventilador dentro de la fuente de seguramente enchufado. alimentación apagada.
  • Página 47: Problemlösung

    All manuals and user guides at all-guides.com Problemlösung MÖGLICHE URSACHE LÖSUNG Das System hat keine Spannungsversorgung. Die * Versichern Sie sich, dass das Stromkabel richtig Stromanzeige leuchtet nicht, der Lüfter im Inneren angebracht ist der Stromversorgung wird nicht eingeschaltet. * Ersetzen Sie das Stromkabel Tastaturleuchten sind nicht an.
  • Página 48 All manuals and user guides at all-guides.com 26/02/2003...

Tabla de contenido