Sony PMC-DR45L Manual De Instrucciones página 45

Notes
• As long as "CD"
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
Tip
You can record the
sound of the connected
component. Insert a
blank tape into the tape
compartment, and
press z/X then N
(page 11).
1
Remove the jack cover from the OPTICAL
DIGITAL OUT (CD) jack of this player and
connect the jack with the digital input jack of the
MiniDisc recorder or other component using the
digital connecting cable (not supplied) .
2
Turn on the power of this player and the
connected component.
3
Make the connected component ready for
recording.
4
Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/
recorder
to LINE IN jack
Audio connecting cable
For MiniDisc recorder:
RK-G136 (1.5 m)
(not supplied)
For TV, VCR recorder:
RK-G129 (1.5 m)
(not supplied)
1
Connect the LINE IN jack of this player with the
line output jack of the MiniDisc player or other
component using the audio connecting cable (not
supplied) .
2
Turn on the power of this player and the
connected component.
3
Press LINE and start playing sound on the
connected component.
The sound from the connected component is
output from the speakers.
TV, VCR,
MiniDisc player/
recorder, etc.
to line
output jack
continued
Setting Up
GB
45