Operations; Operating; Loading - Elbro TL 500 Instrucciones De Empleo

Operations

Thank you for choosing the ELBRO

Operating

| The TL 500 can be switched on or off using the
switch on the top side. The operational time is ap-
proximately 4.5 hours. When switched on, the red
LED will signal that the battery charge is low.

Loading

| Connect the AC adapter (included in delivery) or
car charger to the charging jack and to the mains
power source (or to the car's cigarette lighter).
When switched off, the red LED indicates that the
external power supply is connected.
|
The TL 500 will be ready for operations after
about two hours. To charge the battery completely,
leave the TL 500 charging for one to two hours.
|
Then disconnect the power supply unit from the
external voltage source (or from the cigarette
lighter) and from the TL 500.
®
TL 500.
21
Operations
Switch
On / Off
Charging jack