Descargar Imprimir esta página

Forest-Master ULTIMATE Manual Del Usuario página 9

Caballete de aserrar

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

STEP 8:
Attach the back foot (14) to
the back legs using 2 M6 x
40 mm bolts (11) and 2 M6
nuts (8).
NOTE: Do not over tighten the M8 nut and bolt securing each
back leg to the uprights otherwise it will not be possible to fold
the sawhorse for storage.
IMPORTANT: Be careful not to lose the 2 M6 x 20 mm
bolts and M6 nuts and the 2 locking pins during assembly, as
these will be needed if loading heavy logs.
Ultimate Sawhorse
STEP 9:
Complete the assembly by
fully tightening all nuts and
bolts that have been fitted at
each step.
9

Publicidad

loading