Stroller Operation; Adjust Backrest; Use Buckle; Use Shoulder & Waist Harnesses - Joie versatrax Manual De Instrucciones

Stroller Operation

Adjust Backrest

see images
-
14 15
There are 4 recline angles for the backrest.
Raise Backrest
To raise the backrest, rotate the recline handle on the back of
the seat, pull up on the backrest.
Recline Backrest
To recline the backrest, rotate the recline handle on the back
of the seat, pull down on the backrest.
! Please do not press the releasing button
middle of the recline handle when adjusting the angle for the
recline.
! Make sure the recline is set properly for use.

Use Buckle

see images
-
16 17
Release Buckle
Press the center button to release the buckle.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
and click into the center buckle.
the buckle is locked completely.
! To avoid serious injury from falling or sliding out, always
secure your child with harness.
! Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
! Do not cross the shoulder belts. This will cause pressure on
a child's neck.
25
14
15
- 3& - 3 on the
14 15
16
- 1,
17
- 2 A "click" sound means
17
- 3
17
Use Shoulder & Waist Harnesses
see images
-
18 24
! In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1 Shoulder harness anchor
18
- 2 Slide adjuster
18
For larger child, use shoulder harness anchor and the highest
shoulder slots. For smaller child, use shoulder harness anchor
and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn
the anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
22
Use slide adjuster to change the harness length.
Press the button - 2, while pulling the waist harness to
24
proper length. - 3
24

Use Armbar

see images
-
25 27

Adjust Calf Support

see images
-
28 29
The calf support has 2 positions.
To lower calf support, press the adjustment buttons on both
sides of the calf support -
28
downwards. - 2
28
To raise the calf support, push it upwards. A "click" sound
means the calf is locked completely.
21
- 1
24
1, and rotate the calf support
26