Publicidad
3.
Pull each Frame curtain fully to each window sash
track, and pull the bottom window sash down behind
the Top retainer bar until it meets.
4.
Attach each Frame curtain the window sash by
using screws (Type C.) (See Fig. 10)
5.
Slide the unit into the cabinet.(See Fig. 11)
For security purpose, reinstall screws(Type A) at
cabinet's sides.
6.
Cut the Foam-strip to the proper length and insert
between the upper window sash and the lower
window sash.(See Fig. 12)
7.
Attach the Window locking bracket with a screw
(Type C.) (See Fig. 13)
8.
Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into
place.(See Fig.14)
9.
Lift the inlet grille and secure it with a screw (Type
A) through the front grille.(See Fig. 14)
Window installation of room air conditioner is now
10.
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Screw
14
Fig. 10
Power Cord
Screw (Type A)
Fig. 11
Foam-Strip
Fig. 12
Window locking
bracket
Fig. 13
Fig. 14
Fig. 15
Publicidad
