Sleep Timer Function; Care And Maintenance - Lenco IPD-4600 Guia Del Usuario

Sleep to timer
This feature allows you to fall asleep to the FM radio or iPhone/iPod music for up to 120
Minutes.The unit shuts off automatically when the time expires.
1. Press button from the main unit or the STANDBY
control to turn on the unit.
2. Tune to a desired radio station (radio mode), play a song from docked iPhone /
iPod (iPhone/iPod mode) or play music of an external device connected to AUX
(AUX mode).
To select the sleep timer to turn the unit off after 15, 30, 45, 60, 90 or 120 minutes,
3.
press the SLEEP
sleep time and sleep indicator "
length of time then automatically turns off.
4.
To turn the unit off before the sleep timer counts down to zero, press the
button from the main unit or the STANDBY
any time.
Note :
To check the sleep time status, press the SLEEP button
If you are falling asleep to music from an external device connected to the AUX
input, the sleep timer will shut off the power to this system but it will not turn off the
external device.
-Do not subject the unit to excessive force, shock, dust or extreme temperatrue.
-Do not tamper the internal components of the unit.
-Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be
used.
-Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
-Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
Resetting the Unit
If the unit experiences a power surge or electric shock, it is possible that the internal
micro-controller may lock up and the unit will not respond to any commands from the
panel controls.
1.In this event,unplug and then reconnect the AC power plug into the wall outlet.

Sleep Timer Function

z
button from the Remote Control repeatedly. The selected
z
z
z

Care and Maintenance

" blink. The unit plays for the selected
button from the remote control at
15
button from the remote
z
once.
z