WARNING:
The used lancet and test strip may be biohazardous. Please follow the proper
procedure for discarding biohazardous waste in your area.
5. Read your result
The result of your blood glucose test
will appear after the meter counts
down to 0. This blood glucose result will
automatically be stored in the memory.
Voice Guide
Your blood glucose is (number) milligrams
per deciliter.
6. Eject the used test strip and remove
the lancet
To eject the test strip, point the strip into
a disposal container for contaminated
items. Slide the Test Strip Ejector forward.
The meter will automatically turn itself off
after the test strip is ejected.
Always use with caution when removing
the lancet.
Take the lancet out carefully. Place the
disk on a hard surface and push the
exposed tip into the protective disk.
When removing the lancet, follow the
instructions from the lancing device
insert.
25