Qlock System; Preload Adjuster - SR Suntour Spring Serie Manual Del Usuario

SR SUNTOUR - OWNERS MANUAL

PRELOAD ADJUSTER

All Duro series forks are equipped with an preload adjuster. This preload adjuster allows you
to change the preload of your forks coil springs. The preload of the coil springs influences the
hardness of your fork. So for example if you are looking for an "hard" setup you have to increase
the preload of your coil springs. Additionally to this function, SR SUNTOUR offers different coil
springs with different degrees of hardness's. For more detailed information please contact your
local bicycle dealer.
DURO DJ E / DURO DJ D
DURO DJ E 20QLC
DURO DJ D 20QLC
In order to increase the preload you have
to turn the preload adjuster knob clock-wi-
se. If you want to decrease the preload you
have to turn the knobs counter-clockwise
VARIBLE VALVE CONTROL VVC
Note: The VVC valve is located at the right side of your forks crown.
The variable valve controll (VVC) was developed to protected the oil within the right hand side
cartrigde against foaming. If the oil within the cartridge will mix up with air the viscosity of it will
be reduced. This can negativelly affect the damping characteristics of your fork. Therefore the
pressure value should never be lower then 50PSI (3.5bar). A higher pressure then 60PSI (4.5bar) is
not necessary and will not affect the damping performance.

QLOCK SYSTEM

DUROLUX TAD 20QLC TS / CTS / 1.5"
DUROLUX RCA 20QLC TS / CTS / 1.5"
DURO DJ E 20QLC / DURO DJ D 20QLC
HOW TO CLOSE THE QUICK LOCK
10
English
CLICK!
DUROLUX TAD 20QLC TS / CTS / 1.5
Adjust until finding the proper tighte-
ning torque for closing the QR lever.
DUROLUX / DURO