Setting Sag; Fork Maintenance - SR Suntour Spring Serie Manual Del Usuario

SR SUNTOUR - OWNERS MANUAL

SETTING SAG

The SAG is the compression which is just caused by the body weight and seating position of the
rider and not as a result of riding. Every rider has a different weight and seating position, therefore
the fork will sag more or less. To assure a proper function of your fork and not to interfere the
performance of it, setting a proper SAG is the only way to find the right air pressur for your fork.
Travel
100 mm
120 mm
140 mm
160 mm
180 mm
ZIPTIE

FORK MAINTENANCE

SR SUNTOUR forks are designed to be nearly maintenance free. However, as long as moving parts
are exposed to moisture and contamination, the performance of your fork might be reduced after
several rides. To maintain a high performance, safety and a long life of your fork, a periodic main-
tenance is required.
Please keep in mind that a fork which has not been serviced in accordance with
the maintenance instructions will loose its warranty!
Never use a pressure washer or any water under pressure to clean your fork as
water may enter the fork at the dust seal level.
We recommend that your fork is being serviced more fequently as indicated
below if you ride in extreme weather (winter time) and terrain conditions.
12
Any case you may feel that your forks performance has changed or handles dif-
ferently immediately call on your local dealer to inspect your fork.
English
SAG in % SAG in mm
15 %–20 % 15 mm–20 mm
20 %–25 % 24 mm–30 mm
20 %–25 % 28 mm–35 mm
20 %–25 % 32 mm–40 mm
25 %–30 % 45 mm–54 mm
MAX AIR
Models PRESSURE
[ psi ]
Durolux 150
ZIPTIE
DUROLUX / DURO
MAX AIR
PRESSURE
[ bar ]
10.3
SAG
ZIPTIE