Analysis Software - Weidmuller EPG CUT 40 Manual De Instrucciones Original

5

Analysis software

The tool's operating cycles are saved inter-
nally. You may transfer the data to a PC via the
USB-port and review the data with the supplied
analysis software.
The tool records the following data:
– Operating pressure
– Pressure curve of every operating cycle
– Counter for operating cycles
– Service counter
– Operational hours
– Incomplete operating cycles
– Error messages
You can send the records of faulty operating
cycles to our service.
System requirements
– Operating system Microsoft Windows® 7,
8, 10
– CPU with at least 1.7 GHz
– RAM 1 GB or more
– Hard disk 2 GB or more
– Screen resolution 1024 x 768 or higher
– Other CD-ROM drive
– USB 2.0 interface
26
Plug & Play
► Install the supplied software on your PC.
► Connect the crimping tool with the PC using
the USB cable.
Cutting tool connected to a laptop
The tool will be recognized automatically by
your computer. A comprehensive user guide is
included on the supplied CD-ROM.
2516410000/03/07.2019