Tiiwee Home Alarm Starter Kit Manual Del Usuario página 10

Unpairing remote controls and sensors with the Alarm unit
Zones can be reset individually. Doing so allows you to disconnect the sensors for just that
zone. The Alarm unit can also be disconnected from all remote controls (if you are using
more than one).
IMPORTANT: If more than one remote control is used with the Alarm unit: Please be
aware that there is no option to disconnect just one remote control. With this procedure,
all remote controls are unpaired. Please make sure to again pair the remote controls you
wish to continue to use after you unpaired them.
Deleting the remote control
1. Enter pairing mode by long pressing the SET button [
on. All four lights are now on.
2. Now, again long press the SET button [
will flash. All remote controls have now been disconnected from your Alarm unit.
Deleting the sensors for one zone
1. Enter pairing mode by long pressing the SET button [
on. All four lights are now on.
2. Now, again short press the SET button [
zone you'd like to reset. The respective light on the visual indicator will light up.
3. Now, again long press the SET button [
will flash. The settings for this zone have now been cleared.
Changing the batteries
Please refer to the user manual or leaflet included with the siren or sensors for specific
information regarding the battery power indication.
Adding Alarm units, remote controls and sensors
This Tiiwee alarm system is extremely versatile and flexible. Your Tiiwee Home Alarm Kit
can be extended with more sensors, A1 alarm units and remote controls. You can add
many more Tiiwee sensors to adapt it to your exact requirements. You can extend your
system with more Tiiwee Door and Window or PIR Motion sensors. Up to 10 sensors per
zone - in total 40 sensors.
Extending your Tiiwee Home Alarm System
If you want to add remote controls and sensors, please only select devices from the Tiiwee
Home Alarm System. Our range of supported products is updated regularly.
]. 5 Beeps will be heard, and the light
] one- or multiple times to select the
]. 5 Beeps will be heard, and the light
10
] when the Alarm unit is
] when the Alarm unit is