Página 1
AMF 215 INSTRUCTION MANUAL WE’RE HERE TO HELP Want to watch Want to watch Get it right the Get it right the Our US-based Our US-based Recommended placement Recommended placement a video that a video that first time. first time. install experts install experts shows how...
Página 2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 18 Does your TV No — Perfect! (including accessories) 50 lb weigh more than Yes —...
Página 3
Dimensions TV INTERFACE 400mm 15.75in 100mm 3.94in 300mm 200mm 11.81in 7.87in 400mm 15.75in 200mm 7.87in WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 5deg 15deg 381.4mm 210mm 15.02in 8.27in 260mm 10.24in 45deg 45deg 138.4mm 5.45in SIDE VIEW - RETRACTED FULLY ASSEMBLED MOUNT TOP VIEW - RETRACTED 70.6mm...
Página 4
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 5
STEP 2 Parts and Hardware STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED] Contact Customer Service at 1-800-359-5520 to have these additional pieces shipped directly to you. W E L C O M E ! T H A N K S F O R C H O O S IN G S...
Página 6
STEP 1 Attach TV Bracket to TV 1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket Based on your TV hole pattern measurements Measure the width and height of your TV mounting hole pattern in cm. ), determine the TV bracket configuration: A, B, C, D or E that fits your TV.
Página 7
For TV Hole Pattern For TV Hole Pattern For TV Hole Pattern Measurements Measurements Measurements (Dimensions in cm) (Dimensions in cm) (Dimensions in cm) 40.0 x 30.0 40.0 x 20.0 20.0 x 40.0 40.0 [15.75 in.] 40.0 20.0 [15.75 in.] [7.87 in.] 30.0 [11.81 in.]...
Página 8
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length Standard configurations are shown. For special Test the four TV screw diameters (M4, For flat-back TVs, Spacers supplied for: applications, or if you M6, and M8) in the threaded inserts on are uncertain about your no spacers the back of your TV to determine which...
Página 9
1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D or E) onto your TV, making sure the bracket is both centered and level over your TV hole pattern. NOTE: The hanging tab on TV bracket must be oriented toward the top of the TV. Secure the TV bracket using your selection: screw/washer or screw/washer/spacer.
STEP 2A Attach Wall Plate to Wall Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm) Locate your stud.
Página 11
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Be sure to drill into the center of the stud. Install wall plate assembly using two lag bolts .
Página 12
STEP 2B Attach Wall Plate to Wall Solid Concrete / Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! Concrete Installation Kit CMK1 is not included ● Mount wall plate assembly directly onto concrete surface (no wall covering) (see page 5) Contact Customer Service ●...
Página 13
(Fischer UX 10 x 60R- included in the Concrete Installation Kit CMK1 * ). Remove the wall plate template and insert two anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate assembly using two lag bolts .
Página 14
STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. Install the wall plate caps on wall plate assembly Fold the first section of the arm of wall plate assembly against the wall to provide stability. Hang the TV onto wall plate assembly with the hanging tab , then rest the TV into place.
Página 15
Manage Cables Fully extend the arms of wall plate assembly to ensure you have enough slack in the cables to prevent binding. Remove the cable covers by pinching one end to release. Lock the TV to wall plate assembly with locking screw and washer using hex key Route your cables along the arms of wall plate assembly...
Página 16
TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. To adjust the leveling of your TV, loosen locking screw using hex key , level your TV, then tighten locking screw If your TV is too loose or too tight, adjust tilt tension knob CAUTION: Avoid potential personal injuries and property NOTE: Once your TV is in place, tighten tilt tension knob...
Página 17
REMOVING THE TV HEAVY! You may need assistance with this step. Disconnect the cables from your TV. Remove locking screw using hex key Carefully lift your TV up and off of wall plate assembly...
Página 18
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades. ¿Su televisor pesa más de 22.6 kg No — ¡Perfecto! 22.6 kg , incluidos (50 libras) Sí...
Página 19
ESPAÑOL Dimensiones Ver página 3 Piezas y accesorios suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
Página 20
ESPAÑOL 1,3 Seleccione el diámetro de los tornillos para el televisor Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M4, M6 o M8) utilizar. 1,4 Seleccione el largo de los tornillos para el televisor : Si el dorso del televisor es plano, no se requieren espaciadores : Los espaciadores y los tornillos largos se proporcionan para:...
Página 21
ESPAÑOL Con una mecha de 5.5 mm (7/32'') de diámetro, realice los orificios guía. Retire la plantilla de placa mural IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3''). Asegúrese de perforar el centro del montante. Instale el módulo de la placa mural usando dos tornillos tirafondo .
Página 22
ESPAÑOL PASO 3 Colgar el televisor en la placa mural Ver página 14 ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. Instale las tapas en del módulo de la placa mural Pliegue la primera sección del brazo del módulo de la placa mural contra la pared para dar mayor estabilidad.
ESPAÑOL Ajustes del televisor Ver página 16 AJUSTE DE LA INCLINACIÓN El televisor debe acomodarse fácilmente al moverlo, y luego quedar en su lugar. Si el televisor está demasiado suelto o demasiado ajustado, ajuste la perilla de tensión de inclinación. NOTA: Una vez que el televisor esté...
Página 24
Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: accents.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.