Manuales relacionados para Sanus accents AWSS2
Resumen de contenidos para Sanus accents AWSS2
- Página 1 AWSS 2 SPEAKER STAND INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help!
- Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this product is perfect for you! Do you own a ® Sonos PLAY:1™ The speaker stands are designed to support only PLAY:1 and PLAY:3 speakers. or PLAY:3™...
- Página 3 Dimensions 13 in. (322 mm) 34 in. 10 in. (866 mm) (254 mm) Top View Front View...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 5 Parts and Hardware for STEP 5 Hardware for STEP 6 Bracket Screw ® Sonos PLAY:1™ Bracket 1/4-20 x 5/8 in. ® Sonos PLAY:3™ Horizontal Bracket 2.7 in. Felt Pad Speaker Screw 1/4-20 x 3/8 in. ® Sonos PLAY:3™ Vertical Bracket...
- Página 6 STEP 1 Install Base onto Tube 1/4-20 x 3/4 in.
- Página 7 STEP 2 Slide Collars onto Tube...
- Página 8 STEP 3 Route Speaker Power Cord NOTE: Ethernet cord, if required (see speaker manual), should always be installed after the appropriate power cord. (See page 10) PLAY:1 PLAY:3 Ethernet...
- Página 9 STEP 4 Install Rubber Isolation Pads or Carpet Spikes Rubber Isolation Pads Optional Carpet Spikes WARNING: Twist rubber isolation pads into the base The ends of the carpet spikes are sharp and may scratch flooring, damage wiring, or be hazardous to small children.
- Página 10 Install Ethernet Cord If ethernet cord is required: Set assembled stand upright and feed one end of ethernet cord into the top opening. Work the cord through the tube and pull the end through the bottom opening. NOTE: Ethernet cord should always be installed after the appropriate power cord.
- Página 11 STEP 5 Attach Speaker Bracket 1/4-20 x 5/8 in. PLAY:1 PLAY:3 Horizontal PLAY:3 Vertical...
- Página 12 STEP 6 Attach Speaker - PLAY:1 1/4-20 x 3/8 in.
- Página 13 STEP 6 Attach Speaker - PLAY:3 Horizontal Vertical 1/4-20 x 3/8 in. 1/4-20 x 3/8 in.
- Página 14 STEP 7 Pull Wires STEP 8 Position Collars...
- Página 16 ESPAÑOL INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifi quemos que este producto sea el ideal para sus necesidades. ¿Posee unos altavoces Los soportes para altavoces fueron concebidos para sostener altavoces Sonos®...
- Página 17 ESPAÑOL Dimensiones (consulte la página 3) Piezas y elementos de sujeción (consulte la página 4) ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase NOTA: NOTA: en contacto con el servicio de atención al cliente.
- Página 20 Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: accents.sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.