Attention: Instructions for combinations
Number of
button presses
1
2
3
13.12 "Multi-stage Cooking" Mode
In this mode you can program up to up to 2 automatic cooking sequences. The sequence
and duration of defrosting, microwaving, grill (combination) cooking can be adjusted. If you
intend to use the defrost function, this must be programmed as the first function in the
sequence.
Please note
► The automatic cooking programmes and the preheating function cannot be used for
multi-stage cooking.
• Example: If you want to defrost food for 5 minutes and then microwave the food at 80%
power level for 7 minutes proceed as follows:
1) Press TIME DEFROST once and "dEF2" will be displayed to indicate
defrosting by time.
2) Press
3) Press MICROWAVE and set the power level for microwaving to 80%
by pressing
4) Press START to confirm.
5) Adjust the cooking time by pressing
minutes.
6) Press START to start the multi-stage cooking process.
7) When the end of the cooking time has been reached the system will
sound five signal tones.
Please note
► Please do not confirm the time setting between programming the first and second
cooking programme because that would automatically start the first programme. After
setting the time for the first cooking programme directly enter the function for the
second cooking programme.
caso SMG20
Display
Microwave
G
0 %
C-1
55 %
C-2
36 %
or
to set the defrosting time to 5 minutes.
or
Grill
100 %
45 %
64 %
until the display shows "P80".
or
to 7
63