Connection - Provision ISR Auto Sync Focus Serie Manual Del Usario

Connection

1) Connect the RS-485 cables, make sure you connect as
described below:
2) Connect the controller to the electricity
5
B
A
Power Suply Cable
for Controller
and Camera
Included
3) Connect the video cable (Rj-59) to the camera and connect the
camera to the electricity:
Power Led
When powering on the remote, the green LED on the right top corner
will turn on. If the LED is blinking constantly try removing the power
cable and plug it back in.
The controller auto-detects the protocol and baud rate of the camera,
The protocol and baud rate will be displayed on screen when the
powering on the camera.
Video cable
Rj-59
Power Suply Cable
for Controller and Camera
Included
6