Provision ISR Auto Sync Focus Serie Manual Del Usario página 7

BRIGHTNESS - You can control the BRIGHTNESS of the picture in
a very accurate level of between 0 to 255.
- Scroll to BRIGHTNESS using
- Use to change BRIGHTNESS level,
You can set level between 0-255.
SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN
AGC - At low lightning conditions, if the image is too dark – select
higher AGC level which means that the camera would amplify the
CCD input signal and make image will become brighter but noisier.
- Scroll to AGC using
- Use to change AGC level between:
LOW/MIDDLE/HIGH or OFF.
11
EXPOSURE
AUTO
0|------|-----|255
MIDDLE
ON
RET
DWDR - WDR is used when your want to see BOTH bright and dark
zones of the image. In the mode, you will see the details in both the
dark and bright.
- Scroll to DWDR using
- Use to change DWDR level between ON or OFF,
If select ON – press
- Scroll to LEVEL using
LEVEL
RETURN
- Use ◄ or ► to change level.
When seeing "RETURN" option-
You can either return to last page, or quit the menu,
Scroll to RETURN using
Use to select between RETURN- return to previous page,
END - close the menu.
to set DWDR level.
DWDR
0 -------|-------63
RET
12