Listo RDL 130-50b4 Instrucciones De Uso página 26

after it has been switched off for a prolonged period of time, set the thermostat
to "7" for about 2 hours before placing frozen or deep-frozen products in the
freezer compartment. Then turn the thermostat back to its usual position (the
"5" mark).
• The temperature inside the appliance is a function of several factors, such as the
room temperature, the quantity of food stored, how often the door is opened,
etc.
NOTE: When the thermostat is set to "7", you may hear the compressor running more
often.
t
emperAture indiCAtor
To help you set your appliance correctly, the refrigerator is equipped
with a temperature indicator (located in the coldest zone and indicated
by the pictogram opposite).
• For proper food storage in your refrigerator and, in particular, in the coldest zone,
make sure that "OK" appears in the temperature indicator.
Incorrect setting
Correct setting
• If "OK" does not appear, the average temperature of the zone is too high. Set the
thermostat to a higher position.
• Whenever you adjust the thermostat, wait for the temperature inside the
appliance to stabilise before adjusting it again, if necessary. Only change the
position of the thermostat gradually and wait at least 12 hours before checking
again and possibly changing it.
NOTE: After loading the appliance with fresh food or after opening the door repeatedly
(or leaving it open for a prolonged period), it is normal if the word "OK" does not appear
in the temperature indicator; Wait at least 12 hours before readjusting the thermostat.
• If the evaporator in the refrigerator compartment (back wall of the appliance)
becomes abnormally frost-covered (appliance overloaded, high room
temperature, high thermostat setting, frequent door openings), gradually turn
the thermostat knob back to a lower position until the compressor stops running
periodically again. The refrigerator compartment will only automatically defrost
if the compressor stops intermittently.
V.1.0 26