Listo RDL 130-50b4 Instrucciones De Uso página 34

Frigorífico 2 puertas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

i
n the event of A breAkdown
If the power failure does not last very long, there is no risk of your food spoiling.
However, do not open the doors.
If the breakdown is prolonged, transfer frozen products to another freezer. Your
appliance's operational autonomy is significantly shortened depending on how
full the appliance is.
As soon as you notice that thawing has started, eat the food as quickly as possible;
do not refreeze raw food until after it has been cooked.
C
hAnging the bulb
WARNING: There is a risk of electric shock! Before changing the bulb, switch off
the appliance by turning the thermostat knob to "Off" and unplug it. You can also
remove the fuses or turn off the circuit breaker.
Bulb characteristics: type E14, max. 10 W.
To change the bulb:
The bulb compartment is located to the left of the thermostat, as shown in the
diagram opposite.
Use a small Phillips screwdriver to remove the screw from the bulb cover so that
the protective cover can be removed.
Unscrew the bulb and replace it with a bulb that has exactly the same
characteristics as the original bulb.
Replace the protective cover on the bulb compartment and then put the screw
back in.
Turn the refrigerator back on.
Protective cover
V.1.0
Bulb
Screw
34

Publicidad

Tabla de contenido
loading

Tabla de contenido