Cleaner Assembly; Carton Contents; Attach Handle - Hoover SteamVac Manual Del Propietário

Carton Contents

1.1
A
A. Carpet cleaner body
B. Upper handle
C. Handle bolts and nuts
D. Hose Holder*
E. Hose*
F. Tool Holder with Screw*
*Available on select models only

attaCh handle

1.2 With cord hook to back of carpet cleaner, push
upper handle down onto lower handle. Push bolts
into holes on front of handle, but do not add nuts
yet. If bolts will not go through hole easily handle is
not pushed completely down.
attaCh hose holder
(Available on select models only)
1.3 Slide hose holder onto screws in back
of machine. Now puts nuts in place and use
screw driver to fasten.

1. Cleaner asseMbly

b
C
Remove all parts from carton and identify each item shown.
Make sure all parts are located before disposing of packing
materials.
noTe: Phillips screwdriver needed for assembly.
Accessories not included with your model may be purchased
separately by visiting www.hoover.com.
d
Bare
Carpet
Pre-
Upholstery
floor
Cleaner
Cleaner
cleaner
Carpet
Upholstery
Cleaner
e
1.2
1.3
Actual model may vary from images shown.
5
F