ESAB C-84-42 Manual De Instrucciones página 10

All parts which can be replaced without breaking soldered or brazed joints are illustrated and listed below.
When ordering parts, please give both part number and description (including size where appropriate). Parts
may be ordered from your ESAB welding equipment distributor or from ESAB Welding & Cutting Products,
Customer Service Department, Florence, SC.
NUT - 802
NOTES:
1. Position slot of roll pin to face upwards.
2. Apply light coating of silicone grease P/N 17672
(1 oz. tube) on O-rings before assembly.
3. Threads on throttle valves should be lubricated
only with KRYTOX 240 Compound, P/N 73585064
(2 oz. jar).
4. Apply one drop of Loctite Compound No. 271, P/N
73185271, on the second thread of the pipe thread
part of connection, and then assemble and tighten
connection to body up to approx. 350 in-lbs.
PARTS INFORMATION
BALL - 9232
SPRING - 28Z01
C-84-42 Cutting Torch, 75° Head .............................P/N 18261
C-84-42 Cutting Torch, 90° Head .............................P/N 18260
LEVER - 19527
STEM - 18559
LOCKSCREW - 57K02
O-RING - 85W11
(See Note 2)
SPRING - 23K08
CUTTING OXY. VALVE ASS'Y
(Enlarged View)
6
ROLL PIN - 5/32" DIA. X 3/4"
(See Note 1)
OXY. CONNECTION - 3389
(See Note 4)
FG CONNECTION - 3390
(See Note 4)
THROTTLE VALVE ASSY. - 18255
(See Note 3)
O-RING - 14K07
(See Note 2)
RETAINER 57K03
SEAT - 32Z01