Plugging In The Power Cord And Switching On The Appliance - Rowenta Silence Force Extreme RO59 Serie Manual Del Usuario

RO_ASPIRATEUR_SFE_NAFTA_733284-01_Nafta 02/12/13 10:12 Page4
EN
USING THE PPLI NCE
1 • ssembling the elements of the
appliance
Push the flexible hose into the vacuum inlet
(Fig.1) and turn until it locks. To remove it, turn
in the opposite direction and pull.
• Push the metal telescopic tube into the end of
the power nozzle until you hear a locking 'click'
(Fig.2) (to release it, push the locking button on
the tube and remove it).
•Push the all floor type nozzle (22) into the end
of the metal telescopic tube until you hear a
locking 'click' (Fig.3) (to release it, push the
locking button on the nozzle and remove it).
• djust the telescopic metal tube to the
required length using the telescopic system
(TELESCOPIC SYSTEM) (Fig.4)
Fit the appropriate accessory to the end of the
metal telescopic tube or the power nozzle:
- For rugs and carpets: use the all floor type
nozzle in the retracted brush nozzle position or
the Maxi turbo brush* (fibers and animal hair).:
- For parquets and hard floors: use the all floor
type nozzle in the advanced position or, for a
better result, use the parquet nozzle*.
- For corners and hard to reach spots: use the
telescopic crevice tool*.
- For furniture and fragile surfaces: use the
brush built into the power nozzle (E SY
BRUSH) or the upholstery nozzle*.
IMPORT NT Never operate your vacuum
cleaner without its bag and without its filtration
system (cassette).
IMPORT NT
your vacuum cleaner before changing the
accessories.
ERGONOMIC RECOMMEND TIONS
Comfortable to use, the ERGO COMFORT SI-
LENCE range has been designed to make using
your vacuum cleaner an easier and more en-
joyable experience.
So that you can keep an upright position and
avoid bending your back, make sure you:
1. djust the length of the metal telescopic tube
ERGO COMFORT SILENCE to suit your height
(Fig.5).
2. Place your second hand in front of the power
nozzle handle ERGO COMFORT SILENCE (Fig.6).
* ccording to model: these systems are specific to certain
models or are accessories available as an option.
lways switch off and unplug
2 • Plugging in the power cord and
switching on the appliance
Unwind the power cord completely, plug in
your vacuum cleaner and press on the On/Off
button (Fig.7).
Remark: you can use your vacuum cleaner in
the horizontal position (sleigh position) but
also in the vertical position, notably when you
are vacuuming the stairs or removing dust
from the curtains.
djust the suction power:
using the electronic power control (Fig.8) :
• Position (MIN) for vacuuming delicate
fabrics (curtains, textiles)
• Position (Medium)
vacuuming for all types of
floors, which are only slightly
dirty
• Position (M X) for vacuuming hard
floors and very dirty rugs and
carpets.
with the manual power nozzle switch :
open the power control flap in order to reduce
the suction power manually and avoid the
nozzle "sticking" to the surface that has been
vacuumed (Fig. 9a* or 9b*) e.g.: curtains,
fragile surfaces...
3 • Storing and carrying your
vacuum cleaner
fter use, switch off your vacuum cleaner by
pressing the On/Off switch and unplug it
(Fig.10). Rewind the power cord by pressing
the power cord rewind button (Fig.11). In the
vertical position place the nozzle in the parking
position (Fig.12).
This allows you to carry and store your vacuum
cleaner when it is in the parking position
(Fig.13).
4
for everyday