Fitting The Elements Onto The Appliance; Plugging In The Power Cord And Switching On The Appliance; Storing And Transporting The Appliance - Rowenta SILENCE FORCE RO83 Serie Manual De Instrucciones

USE
1 • Fitting the elements onto the
appliance
Clip the end of the hose to the suction inlet
located at the front of the appliance (fig.1). To
remove, unclip the end using the clip and
remove.
Attach the accessory holder* (26*) to the notch
in the parking position (7) located at the back of
the vaccuum cleaner (fig.2) and store the
accessories on top.
Note:The accessory holder* (26*) needs to be
removed to open the vacuum cleaner lid.
• Fit the metal telescopic tube to the end of the
nozzle until you hear a click indicating that it is
locked (fig.3). To remove, press the tube lock
button and remove.
• Fit the multi-surface nozzle (19) to the end of
the metal telescopic tube until you hear a click
indicating that it is locked (fig.4). To remove,
press the nozzle lock button and remove.
• Adjust the metal telescopic tube to the desired
length using the
(TELESCOPIC SYSTEM) (fig.5).
Fit the corresponding accessory to the end of
the metal telescopic tube or the nozzle:
- For rugs and carpets: use the multi-surface
nozzle in the retracted brush nozzle position or
the MaxiTurbo-brush* (23*) (fibers and animal
hair).
- For parquet and smooth floors: use the multi-
surface nozzle in the brush release position or for
best results use the parquet nozzle* (20* or 21*).
- For corners and hard to reach spots: use the
telescopic crevice nozzle* (24*) .
- For upholstery and delicate surfaces: use the
brush with the nozzle (EASY BRUSH) (17c) or
the upholstery nozzle* (25*) .
IMPORTANT: always switch off and
disconnect your vacuum cleaner before
changing the accessories.
ERGONOMIC RECOMMENDATIONS
The ERGO COMFORT SILENCE range has
been designed to facilitate and improve
user comfort when vacuuming.
To prevent bending over and to ensure
upright posture, make sure to:
1. Adjust the length of the ERGO
COMFORT SILENCE metal telescopic tube
to your body (fig.6).
2. Place your second hand on the front of
the ERGO COMFORT SILENCE nozzle
handle (fig.7).
* According to model: these systems are specific to certain
models or are accessories available as an option.
telescopic system
2 • Plugging in the power cord and
switching on the appliance
Unwind the power cord completely, plug in
your vacuum cleaner and press the ON/OFF
button (fig. 8).
ATTENTION: do not operate your vacuum
cleaner without the filtration system fitted
(foam, microfilter and filter).
Set the suction power using the manual power
switch on the power nozzle (fig.9):
• Position (MIN) for vacuuming delicate
fabrics (curtains, textiles).
• Position (Medium) for daily vacuuming of
all types of surfaces with low
levels of soiling.
• Position (MAX) for vacuuming hard floors
(tiled floors, parquet, etc.) and
rugs and carpets in the case of
high levels of soiling.
3 • Storing and transporting the
appliance
After use, switch off your vacuum cleaner by
pressing the ON/OFF button and unplug it (fig.
10). Wind the power cord by pressing the
power cord rewind button (fig. 11).
It is easy to carry your vacuum cleaner using
the handle (3).
Do not carry your appliance using the dust
compartment handle (fig.12).
When storing your vacuum cleaner, place the
tube in its storage compartment at the back of
the appliance (fig.13). You do not need to
remove the accessory holder (26) to store the
accessory range (Fig.14).
5
EN