Husky 44602 Guía De Uso Y Mantenimiento página 10

Assembly (for two Wall Storage Racks)
2
Connect H1, D1 and G1 on the fl oor.
□ Connect the wall wount base assembly (H1) to the vertical base assembly bracket (D1) using bolts (BB),
nuts (FF), and washers (KK and LL).
□ Connect the base assembly bottom bracket (G1) to the
nuts (FF), and washers (KK and LL).
NOTE: Hand tighten all
bolts until rack is complete.
Interior Exterior
FF LL KK BB
3
Replace bolt
□ Replace the indicated bolt with a long bolt (II) without using the nut.
vertical base assembly bracket (D1) using bolts (BB),
x 3
H1 H1
Figure 1
G1
G1
II
10
D1
x 1