Husky 44602 Guía De Uso Y Mantenimiento página 12

Assembly (for two Wall Storage Racks)
6
Connect the support brackets to the base assembly
□ Connect the short diagonal support brackets (E1) to the wallmount base assembly (D1).
□ Connect the diagonal shelf support brackets (C1) to the short diagonal support brackets (E1).
□ Connect only the opposite side diagonal shelf support bracket (C1)
to the vertical base assembly bracket (D1).
7
Replace existing bolts with long bolts
□ Remove bolts and nuts from the existing base assembly bottom bracket (G1) and replace with a long bolt (II), washers (KK and LL),
and a nut (FF).
Interior
x 1
II
KK
12
Interior Exterior
FF LL KK BB
E1
C1
Exterior
x 1
FF
LL
x 3
Reattach
D1
Reattach
Opposite side