Husky 44602 Guía De Uso Y Mantenimiento página 13

Assembly (for two Wall Storage Racks)
8
Attach the shelf support to the base assembly
□ Remove the existing bolt and nut from the wall storage rack (H1, B1, only on top) and replace with a long bolt (II), washers (KK and LL),
and nut (FF). Attach the horizontal shelf support (A1) left to the vertical base assembly (D1).
□ Attach the horizontal shelf support right (B1) to the opposite side next to vertical base assembly (D1), using bolt and nut (FF, LL, KK, BB).
9
Connect the front shelf bracket
□ Remove bolt (BB), nut (FF), and washers (KK and LL) from the wall storage rack at parts (B1, C1, F1) and connect both front shelf
brackets (F1) to the left horizontal shelf support (A1) and the diagonal shelf support bracket (C1) using a large bolt (II), nut (FF), and
washers (KK and LL).
□ Connect the front shelf bracket (F1) on the opposite side to the left horizontal shelf support (A1) and the diagonal shelf support bracket
(C1) using bolt (BB), nut (FF), and washers (KK and LL).
NOTE: Tighten all bolts.
A1
Interior
II KK LL FF
x 1
F1
C1
13
Interior
FF LL
Exterior
x 1 B1
F1
A1
Please contact 1-888-HD-HUSKY for further assistance.
B1
Exterior
x 1
KK BB
Exterior Interior
BB KK LL FF
B1
C1
HUSKYTOOLS.COM
x 1