DXV Orchard D35130 Instrucciones De Instalación página 2

INSTALLATION PROCEDURES
Typical installation may include cabinet support preparation, installation of faucet & pop-up drain, connection of
flexible water supply lines, attachment of sink to cabinet and installation of drain & water supplies.
Sink Mounting Provisions – The cabinet area beneath the sink must be reinforced to provide sufficient support.
The wood support frame for the sink must support 400 pounds (approximate weight of sink when full and garbage
disposal installed).
CABINET SUPPORT PREPARATION
Important Note:
This installation assumes the use of a custom cabinet and countertop design. It is not designed for use with standard
cabinet bases or standard countertops. Installation must be performed by a professional cabinet maker and shall be
in accordance with all local plumbing and building codes requirements.
FLUSH MOUNT or UNDER COUNTERTOP INSTALLATIONS
(See page 7 for above counter top installation)
1
DETERMINE MOUNTING OPTIONS
Determine if the sink will be mounted flush or under countertop. Next measure the actual size of the sink being
installed to determine cabinet opening dimensions and support frame location. The cabinet opening should
equal dimensions of the sink to minimize the gap between the sink apron and cabinet.
The type of sink installation being performed will determine the support frame location.
HOT & COLD SUPPLIES
BOTH SIDES
LEVEL TOP SURFACE OF SINK & COUNTERTOP
BEFORE SECURING
SINK
FRAME
COUNTERTOP
FRAME
FRONT & REAR
2
FLUSH MOUNT
INSTALLATION
SHOWN
791598-100 Rev. D