DXV Orchard D35130 Instrucciones De Instalación página 4

3
SINK INSTALLATION
CAUTION: Sinks are extremely heavy.
For personal safety, use extra person during installation.
STEP 1. Carefully set the sink within the support frame and position in center of cabinet opening. Check clearance
around sink apron and ensure sink is centered within cabinet opening. Ensure sink base is making proper contact
with support frame and countertop. Adjust or shim, as needed, to obtain proper sink position and fit.
STEP 2. Carefully remove sink and place a bead of sealant around top edge of support frame where the sink
and frame will make contact. Then replace sink into position. See diagram below.
4A
FLUSH MOUNT INSTALLATION
Using carpenter's square carefully measure and mark the location of the cutout opening in the countertop.
NOTE: Determine cutout opening from the actual sink size.
The cutout opening should equal the dimensions of the sink to minimize gap between the sink and the
countertop opening.
PLACE A BEAD OF SEALANT AROUND
TOP EDGE OF SUPPORT FRAME
CUTOUT DIMENSIONS
ACTUAL SINK DIMENSIONS
COUNTERTOP CUTOUT DIMENSIONS
4
ACTUAL SINK
DIMENSIONS
COUNTERTOP
791598-100 Rev. D