Operation - Omcan PE-IT-0019-S Manual Del Usuario

COMMAND PANEL DESCRIPTION
FIRST LIGHTING OF THE OVEN
At the first use of the appliance it is advisable to heat the empty oven to eliminate bad smells caused by the
refractory stones evaporation and the inner metallic parts.
Procedure:
• Fully open the exhauster valve.
• Turn the main switch in position "1".
• Leave the oven working (empty) for at least 8 hours at the temperature of 300° before proceeding to the
first baking.
START UP PHASE
The analogical thermometer display shows the actual average temperature of the baking chamber. Rotate the
thermostat knobs and until the expected temperature. In this way top and bottom heating elements are under
working and the relevant light signals switch on.
USE OF EXHAUSTER VALVE
While baking regulate the valve according to the exigencies. Oven is under heating; so, the set temperature
is reached in shortest possible time. By the exhauster valve the operator can regulate the baking steams and
fumes flow out from the baking chamber, while in the same the heat is kept.
Pilot Light
Top
Pilot Light
Bottom
Cooking Chamber
Light Switch
Thermostat for the
Regulation Top
Analogic Control
Thermometer
Thermostat for the
Regulation Bottom
Main Switch
7

Operation